| BigLoaf |
Sat Dec 31, 2005 2:27 pm |
|
| What's a good source for type 4 engine tin? I couldn't find much in the classifieds, or on the normal sites I use for parts. I'm looking for another set up the upper cylinder covers and lower cylinder covers. |
|
| westy78 |
Sat Dec 31, 2005 2:46 pm |
|
PM Karl here. He usually has a set. If not Karl than Jake Raby often has some pieces left over from the DTM conversions he does.
Or you could try www.thebusco.com
or www.bustedbus.com |
|
| Karl |
Sat Dec 31, 2005 4:47 pm |
|
What do you need? I have piles of it.
Pick letters and let me know:
http://www.bus-boys.com/aircoolsystem.html
http://www.bus-boys.com/aircoolsystem.html#tin
If you can't find it, describe it.
Pmail me at [email protected] |
|
| trackwesty |
Sat Dec 31, 2005 7:06 pm |
|
| Karls stuff is always in nice condition too If you need some beat up pieces I have some maybe we can work a deal on the flywheel etc. you PM'ed me about |
|
| germansupplyscott |
Sun Jan 01, 2006 8:27 am |
|
BigLoaf wrote: What's a good source for type 4 engine tin? I couldn't find much in the classifieds, or on the normal sites I use for parts.
germansupply.com has an excellent supply of rust-free used type 4 engine tin. some of it is listed on our site, much of it is not yet listed. |
|
| BigLoaf |
Sun Jan 01, 2006 6:17 pm |
|
| Hey trackwesty, beat up stuff would be a hell of a lot better. I'll PM you about it. |
|
| Jake Raby |
Tue Jan 03, 2006 8:12 am |
|
| I have all the tin yiou could ever need... Thousands of pieces left over from all my conversion strip downs. |
|
| poptop tom |
Tue Jan 03, 2006 8:57 am |
|
Quote: Thousands of pieces left over from all my conversion strip downs
What exactly is a "conversion strip down"? |
|
| boboskips |
Tue Jan 03, 2006 10:03 am |
|
Quote: What exactly is a "conversion strip down"?
Check out his links. |
|
| 71_transporter |
Tue Jan 03, 2006 3:16 pm |
|
| i have a complete set that needs cleaned up If you are interested give me a pm.... |
|
| okartguy |
Tue Jan 03, 2006 10:23 pm |
|
Hey Karl/whoever can help-
I too need a couple of tin pieces; according to the links they are as follows:
R. 039-119-355AU Warm Air Duct, Lower Left, Used 1979 California Only
(my bus has Cali emissions info, so I'm assuming this to be the case)
W. 021-119-356EU Warm Air Duct, Lower Right, Used 1975 to 1978 All
(I have a '79, but there's no listing for '79 lower right tin. Is this right)
Anyway, please shoot me a message if you can help me out. Thanks- |
|
| Karl |
Wed Jan 04, 2006 11:03 pm |
|
79 Cal lower tin is rough to find. I believe I have both. The right front lower is 79 only. I believe the right lower is same as 72-74 but that depends on the shape of the right front lower edge.
I have been bedridden with the flu for over a week. Hopefully this weekend I will feel better and look for 79C lower tin. |
|
| okartguy |
Sun Jan 08, 2006 10:15 am |
|
| If you happen to find it, let me know and I'll take it off your hands. Hope you're feeling better and take care! |
|
| Karl |
Sun Jan 15, 2006 7:07 pm |
|
okartguy wrote: If you happen to find it, let me know and I'll take it off your hands. Hope you're feeling better and take care!
I have both from a 79 Calif engine.
I will PM you. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|