| 71SuprDub |
Mon Jul 07, 2003 8:12 pm |
|
My brake lights and running lights work but i have to wiggle the bulb to a certain spot in order for them to work, but they wont stay in that spot. What do i need to fix this problem.
Thanks |
|
| joshmeacham |
Mon Jul 07, 2003 11:53 pm |
|
| i'd try cleaning the conections on the socket..'no power' with some type of solvent and sand paper...or make sure you have new bulbs..mine did the same thing. but once i got the covers in place they stay'd ok and have for the last 2 years |
|
| VW Tazz |
Tue Jul 08, 2003 7:02 am |
|
I find that the bulb sockets clean up well with a fresh battery treminal brush followed by some dielectric grease (tune-up grease). Helps stop the corrosion.
hope this helps :) |
|
| 71SuprDub |
Tue Jul 08, 2003 2:46 pm |
|
| ok ill try, thanks a lot! |
|
| [email protected] |
Wed Jul 09, 2003 11:13 pm |
|
| you can aslo try to get the contacts from the bulb holder pulled out a little more so the bulb makes contact. also try to wire brush the metal part of the bulbs and that should fix it. the bulbs are probably corroded and that is due to condensation in the housing. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|