| wolfman's brother |
Mon Aug 18, 2008 7:04 pm |
|
| should a june of '63 car have on it?got new shocks coming at work tomorrow and was going to paint them so they're not that monroe blue.I still gotta get the upper bolts convinced to come loose before I can put them on 1st. |
|
| Typ311Dave |
Mon Aug 18, 2008 7:59 pm |
|
No thank you....but I did buell alot in high school.
Hey dude, let's party! |
|
| RTKings |
Mon Aug 18, 2008 10:57 pm |
|
Mark-
Not sure if 100% entirely correct, but here's mine:
http://www.motorworksrestorations.com/past/'64%20Notch%20(Kingsbury)/pages/309%20Painted%20shocks_JPG.htm |
|
| ibjack |
Mon Aug 18, 2008 11:39 pm |
|
| I believe that Koni's were red and boge were a greyish blue color. |
|
| Mobiltune |
Tue Aug 19, 2008 12:18 am |
|
sears shocks should be green
i dont have a paint chart for shocks
get a twister wheel and spin |
|
| notchboy |
Tue Aug 19, 2008 7:41 am |
|
On my 62 the shocks are all Boge. The fronts carry a T1 PN and the rears have a T3 PN. When I cleaned them down to the original paint I found the fronts to be black and the rears were a browinish red color (burnt orange). When repainting them I chose to use the rustolium burnt orange primer with a clear coat as it was the closest off the shelf rattle can HD had.
951-760-5747 call me next time :wink: |
|
| EverettB |
Tue Aug 19, 2008 8:36 am |
|
On my '63 Squareback they are all black.
They are original. |
|
| ibjack |
Tue Aug 19, 2008 8:51 am |
|
| You should clean them!!! |
|
| wolfman's brother |
Tue Aug 19, 2008 7:50 pm |
|
| well the driver's which looks to be an original is black and dead as hell with no life in it and the passenger's is a gr2 painted black and has some life in it but not much this may explain why one sides components are worse than the others? :? |
|
Powered by phpBB © 2001, 2005 phpBB Group
|