mstatedog |
Sat Aug 23, 2008 5:39 pm |
|
Just thought I would post some photos of how I set up my drill press to drill mirror extension pin holes in new mirrors...bus mirrors I think...I set the extension up first so that the bit would pass thru the pin hole...then screwed the mirror on and drilled the hole starting with a small bit and working my way up.....
dog |
|
kubelmann |
Sun Aug 24, 2008 7:15 am |
|
I prefer a drop of lock-tight on the mirror threads and skip using the pin. I recommend that folks do not drill my mirror extensions but rather use Loctite® 242® Threadlocker Blue Removable. It will hold the parts together permanently but can still be taken apart later for mirror replacement. |
|
74 Cosa |
Tue Aug 26, 2008 2:24 pm |
|
I lost here! Why are you drilling the mirror? :? |
|
mstatedog |
Wed Aug 27, 2008 4:59 pm |
|
The mirror extensions and mirror have a hole for a pin to secure them. The repro mirrors I bought did not have the hole.
dog |
|
Powered by phpBB © 2001, 2005 phpBB Group
|