| raynose |
Tue Mar 17, 2009 5:49 pm |
|
72 super.....replaced the wiper assembly on my bug and now the wipers are fine when going ...(they go to the edge of the glass and then return to top but upon turning off the switch the wiper move up the glass about 30 degrees before stopping and stay there. If i adjust then down to the edge of glass when operating they then go past the rubber onto the front crowl. Tried many adjustments but can't seem to get it right. Hard driving with the wiper 1/4 way up the window.
Any suggestions would be appreciated. |
|
| mnussbau |
Tue Mar 17, 2009 7:34 pm |
|
Sounds like you need to adjust the park position, not the blades. Try this thread:
http://www.thesamba.com/vw/forum/viewtopic.php?t=327859&highlight=wiper+park+position |
|
| raynose |
Tue Mar 17, 2009 7:43 pm |
|
| tks mnussbau....didn't know u could do that but after reading the thread i will try it tomorrow. sounds like all i need to do is this adjustment. will post the results ..tks again for response |
|
Powered by phpBB © 2001, 2005 phpBB Group
|