| clubtreb |
Sat Mar 16, 2013 5:26 pm |
|
| I bought it on amazon. Where do i put the 2 clamps? Then what else do i need to do? Key on or off? |
|
| norcalmike |
Sat Mar 16, 2013 5:37 pm |
|
| back of the starter solenoid.one on the power nut on on the tab. key on if you want it to fire |
|
| clubtreb |
Sat Mar 16, 2013 5:44 pm |
|
| Trying to remember what it looks like back there. So I'm catching what your saying.. one clip to each terminal on solenoid? |
|
| demon1018 |
Sat Mar 16, 2013 5:57 pm |
|
| you put 1 wire on the starter bolt that goes to the batt. the other goes to the one toward the top of the soilinoid. there is a smaller wire going to it. you might have to just remove the wire if the connector covers the metal part. that wire goes to the key switch when you turn it to start . it doesnt need to be hook up if your using the remote start button. if you want it to start then have the key on . if your just turning the motor over leave the key off. make sure its in nuetral :D |
|
| norcalmike |
Sat Mar 16, 2013 6:08 pm |
|
clubtreb wrote: Trying to remember what it looks like back there. So I'm catching what your saying.. one clip to each terminal on solenoid?
you got it. you'll have an "aha" moment when you get under there. its easy |
|
| clubtreb |
Sat Mar 16, 2013 6:36 pm |
|
| Thank you very much guys..... |
|
Powered by phpBB © 2001, 2005 phpBB Group
|