| bugbyte |
Tue Sep 28, 2010 4:22 pm |
|
That is awesome! - Can't wait to go to work (I work in Delaware, the home of Dupont.) - I'll dazzle 'em with my vast knowledge of this important topic.
Thanks again to all the posters. |
|
| DrummerDaveB |
Wed Sep 07, 2011 8:05 am |
|
Im bumping up this thread. I've searched, but this is the closest I've found.
I bought a Holley "Style" fuel regulator that has 3/8" NPT female ports.
I have to supply my own stuff to connect it to the fuel line.
Here's what I've got, so tell me what I need:
Fuel Line to Regulator (x2):
3/8 to 1/4 NPT Adapter
1/4 NPT to barbed fitting.
Fuel Regulator to Fuel Pressure Gauge
3/8 to 1/4 NPT Adapter
1/4 to 1/8 NPT adapter.
Fuel gauge has 1/8" NPT.
I hate all these adapters, but there dont seem to be any 3/8" NPT to 1/4" barb pieces to be found, or 3/8 to 1/8 npt connections either.
So on these connections, I assume I need some teflon tape or something to seal the threads, right?
Do you know of any better ways to do this aside from running hard lines? |
|
| Cusser |
Wed Sep 07, 2011 12:08 pm |
|
DrummerDaveB wrote: I bought a Holley "Style" fuel regulator that has 3/8" NPT female ports. I have to supply my own stuff to connect it to the fuel line. Here's what I've got, so tell me what I need:
Fuel Line to Regulator (x2):
3/8 to 1/4 NPT Adapter
1/4 NPT to barbed fitting.
#5346K24 brass 3/8 MNPT to 1/4 inch hose barb at mcmaster.com
Fuel Regulator to Fuel Pressure Gauge
3/8 to 1/4 NPT Adapter
1/4 to 1/8 NPT adapter.
Fuel gauge has 1/8" NPT.
#4429K471 brass 3/8 MNPT to 1/8 FNPT hex reducing bushing at mcmaster.com (assuming your gauge is 1/8 inch FNPT, female NPT)
|
|
| DrummerDaveB |
Wed Sep 07, 2011 1:34 pm |
|
Cusser wrote: DrummerDaveB wrote: I bought a Holley "Style" fuel regulator that has 3/8" NPT female ports. I have to supply my own stuff to connect it to the fuel line. Here's what I've got, so tell me what I need:
Fuel Line to Regulator (x2):
3/8 to 1/4 NPT Adapter
1/4 NPT to barbed fitting.
#5346K24 brass 3/8 MNPT to 1/4 inch hose barb at mcmaster.com
Fuel Regulator to Fuel Pressure Gauge
3/8 to 1/4 NPT Adapter
1/4 to 1/8 NPT adapter.
Fuel gauge has 1/8" NPT.
#4429K471 brass 3/8 MNPT to 1/8 FNPT hex reducing bushing at mcmaster.com (assuming your gauge is 1/8 inch FNPT, female NPT)
I never thought to try there.
Thx |
|
Powered by phpBB © 2001, 2005 phpBB Group
|