wspeights |
Mon Feb 03, 2003 6:17 am |
|
I am converting from a single stock carb to dual carbs, but don't know where to connect the breather hose from the oil filler tube that used to go to my air filter. Do I drill a hole and put a fitting through the top of one of my dual carb filters or what. My oil filler has two "vents"...one to the air filter and one to a down-tube that goes through the tin and out behind the engine. Is that one enough? Any help would be appreciated.
Don |
|
truckersmike |
Mon Feb 03, 2003 9:01 am |
|
I drilled a tap and put in a connector on one of my filters. It wasn't too hard to do. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|