| ottovu |
Sat Feb 26, 2011 1:18 pm |
|
Hi!
I would like to install a green faced VDO oil temp/pressure guage I have found in my '67 912. Its graduated in F'/PSI 140-280 degrees and 0-140 psi. I assume its an old 911 part. I'd post a pic if I could, but have camera issues. Does anyone know the details as to which senders to use. I realize I'll need an additional wire. Thanks! Keith [email protected] or 520-404-2875 |
|
| anmilsurp |
Sun Feb 27, 2011 5:35 pm |
|
| 67 and earlier VDO oil temp senders are all the swan neck dipstick style as far as I know, and they don't interchange with any other sender. Any VDO 10-180 ohm 150PSI or 10 bar sender should work with the oil pressure gauge. |
|
| ottovu |
Mon Feb 28, 2011 8:10 am |
|
| Thanks for the info, I have found that the original temp sender works and seems to read correctly, I'll look for a 10 bar pressure sender. kb |
|
Powered by phpBB © 2001, 2005 phpBB Group
|