| poomwah |
Thu Sep 15, 2011 9:33 pm |
|
http://www.thesamba.com/vw/classifieds/detail.php?id=1191642
do they interchange?
also, do they have the same bolt pattern? |
|
| chubby53 |
Thu Sep 15, 2011 10:07 pm |
|
| yes i think they do. I don't think they varied bolt patterns between cars, just the 5 lug and 4 lug |
|
| poomwah |
Thu Sep 15, 2011 11:09 pm |
|
| would the spindles work too? |
|
| Mal evolent |
Fri Sep 16, 2011 5:48 am |
|
| I have a set of these on the front of my '73. The thing to know is the spindles use the old small thread tie rod ends, a little less robust than later beetle tie rod ends. |
|
| jsturtlebuggy |
Fri Sep 16, 2011 8:19 am |
|
Those are spindles are for a linkpin front end.
Spindles look to modified to use a ball joint spindle stub.
If you have stock ball joint spindles you are going to need a bracket or different spindle to mount caliper. |
|
| Gary Massin-Ball |
Fri Sep 16, 2011 8:27 am |
|
X2 on the link pin set up!
You can see where these have been cut and welded. there is a balljoint spindle mated to a link pin back so the later rotors will fit the spindle but the assembly will only fit king and link pin front suspension.
Gary. |
|
| dirtkeeper |
Fri Sep 16, 2011 9:58 am |
|
| Boy you guys got good eyes. they look like regular old ghia spindles to me . I have a ghia spindles and rotors on my bug ball joint front end and i used standard 69' ball joint type tie rod ends. |
|
| poomwah |
Fri Sep 16, 2011 11:41 am |
|
| you guys are the greatest. thanks everybody :] |
|
Powered by phpBB © 2001, 2005 phpBB Group
|