| 0to60in6min |
Sat Sep 17, 2011 11:47 pm |
|
hi all,
Could any one tell me is there any substitute to replace the power door lock actuator (about 150.00)? for a 89' Carat
thanks |
|
| pioneer1 |
Sun Sep 18, 2011 6:02 am |
|
| wrecking yard,eBay,Samba classifieds...any luck searching the interweb? |
|
| eeebee |
Sun Sep 18, 2011 7:57 am |
|
There are some good threads on power door locks. Here are a few.
http://www.thesamba.com/vw/forum/viewtopic.php?t=331669&sid=0f1df574f59fa680eb5ee7fa53b5f4dc
http://www.thesamba.com/vw/forum/viewtopic.php?t=261047&highlight=locks
http://www.thesamba.com/vw/forum/viewtopic.php?t=471552&highlight=locks |
|
| syncrodoka |
Sun Sep 18, 2011 9:42 am |
|
Eurovan power door lock actuator is a excellent replacement unit as they typically last longer. The vanagon plug needs to be transferred over but the rest is a direct replacement. That may open up more replacement options in the junk yard.
Good luck. |
|
| vanjoe |
Sun Sep 18, 2011 10:54 am |
|
If you like fiddling around take it apart and clean the contacts. This is info on here about guys sucessfully rebuilding them. Me included. Here is a link for a post. There are little springs that rust out sometimes the contacts are completely shot. Its worth tearing apart to save you money. But they may or may not be rebuildable. I got lucky. If you need new springs I got mine at ACE Hardware. Or you can use some from a pen.
http://www.thesamba.com/vw/forum/viewtopic.php?t=455378&highlight=window+actuator |
|
| pushkick |
Sun Sep 18, 2011 11:25 am |
|
there is a great post of after market door lock actuators it shows a commando unit being install couldnt find the one with pics but here is one
http://www.thesamba.com/vw/forum/viewtopic.php?t=317539&highlight=door+lock+actuator |
|
| 0to60in6min |
Sun Sep 18, 2011 1:40 pm |
|
thanks guys,
yesterday before I post I was stuck with the tiny springs.. by luck I got one after destroying about a dozen of ball pens... it's working now
I'd like add: before re-assembling, position the be big wheel and the slider in the UP position
thanks again |
|
Powered by phpBB © 2001, 2005 phpBB Group
|