TheSamba.com :: View topic

Sat Feb 18, 2012 3:46 pm

did a search and couldn't find anything, i'm sure it's on here somewhere though.

Anyways, I need to replace the area where my tail lights would be on a 62, bigger one's have been cut in, looking for some measurements as to location. Maybe from belt line down and from deck lid over.

any help would be much appreciated!! thank's.

Sat Feb 18, 2012 7:14 pm

thanks for the reply, but I have a 62 :)

needed for these tail lights.

borrowed pic from gallery, thanks.

Sat Feb 18, 2012 7:46 pm

I have a 62 double cab I could measure but I don't know if it would be the same as a bus.

Sun Feb 19, 2012 1:21 am

Cool, thanks Jeremy, I think if you measured from the top of the deck lid/engine compartment down to the top of light opening that should be the same, then from side of compartment to side of opening it should all work out.

Sun Feb 19, 2012 8:10 am

This is from my 62
tyzel wrote: Cool, thanks Jeremy, I think if you measured from the top of the deck lid/engine compartment down to the top of light opening that should be the same,
5 3/8"
Quote: then from side of compartment to side of opening it should all work out.
2"

Sun Feb 19, 2012 9:47 pm

Thanks Scott! Much appreciated :D