| 1105 |
Fri Apr 19, 2013 6:39 am |
|
Rebuliding 1967 reduction boxes. Does anyone know the torque spec for the the nut on the stub axel that holds the stub axel in the reduction box. Not the axel nut. Also the torque spec for the 8mm bolts that hole the reduction box case halves together.
Thanks for your help.
1105 |
|
| hazetguy |
Fri Apr 19, 2013 8:48 am |
|
41mm headed nut on driven axle: 150Nm (110 ft. lbs).
reduction box case cover bolts: i usually torque these to 25Nm (18 ft. lb). |
|
| 1105 |
Sun Apr 21, 2013 7:42 am |
|
Dear Hazetguy,
Thank you for the reply.
Yours,
1105 |
|
Powered by phpBB © 2001, 2005 phpBB Group
|