View original topic: 86-91 Fan resistor replacement
VWmuleskinner86 Fri Oct 25, 2013 10:56 pm

Hello to all. I'm about to change out my fan resistor as I order a new replacement from van cafe and I know the connectors have to be spliced over since it's off the euro van but after looking at my original connector set up its in better bad shape. My original connector from the resistor is gone and just pushed in the harness connector. Looks as if the last owner tried to fixed the connections by hardwiring one of the wires and connecting the others into the harness connector. Could I just buy a euro van harness connector and splice that instead, leaving the new resistor as is? Since my original connectors are toast

VWmuleskinner86 Sat Oct 26, 2013 6:29 am

Do you guys think it's safe to remove my old harness resistor connector and use one from a euro van? If not I'll to search for someone parting out a vanagon..

VWmuleskinner86 Sat Oct 26, 2013 6:36 am

insyncro Sat Oct 26, 2013 6:47 am

I can supply a good used connector with a few inches of wire.

Pmail me.

It could ship Monday first thing.

thummmper Sat Oct 26, 2013 11:48 pm

I just spliced in three 1/4" spade connectors, all booted & tubed. most replacement resistors don't have the original plug anyway.

insyncro Sun Oct 27, 2013 6:32 am

Sending a stock resistor and harness pigtail.

VWmuleskinner86 Mon Oct 28, 2013 10:10 am

Thanks insyncro!

Powered by phpBB © 2001, 2005 phpBB Group