| BWD |
Fri Aug 23, 2002 5:53 pm |
|
How do you get new races into the hub?
The idiot book says take them to VW, yeh, right! |
|
| oly29 |
Fri Aug 23, 2002 9:21 pm |
|
| Find some large sockets that just match or are a little smaller than the outside dimension of the races and use these to drive in the bearing races. |
|
| TimGud |
Fri Aug 23, 2002 9:25 pm |
|
| A cheap trick is to drive out the old races and take them to the bench grinder and grind down the outer diameter a bit until they drop in without binding.Then use them to drive in the new races. Good luck |
|
| BWD |
Fri Aug 23, 2002 9:27 pm |
|
Thanks guys, I went to get a race driver and they wanted $36.00! your idea's sound good!
And a lot cheaper!! |
|
| BWD |
Sat Aug 24, 2002 1:36 pm |
|
Hey, That worked great! 36mm and 30mm Perfect, and I already had them!
Thanks!!! |
|
| BWD |
Sat Aug 31, 2002 5:35 pm |
|
| WHAT??? |
|
Powered by phpBB © 2001, 2005 phpBB Group
|