| mark66db |
Sun Apr 05, 2015 12:40 pm |
|
...building a buggy, wiring from scratch, have dual type master...
question is, can i use only ONE switch? if so, does it matter which port is used?
(the front one is MUCH easier to access)
and why are there 3 prongs on the switch i have? trying to keep things simple here, ill use two switches iif i HAVE
TO...any help appreciated, thanks! M |
|
| Dale M. |
Sun Apr 05, 2015 12:56 pm |
|
Yes you can use a single 3 terminal switch.... Be sure to plug other hole...
When both switches are used it just indicates if one plunger has failed and has no pressure....
This is how its wired with two switches as warning system....
You should be able to just wire 12 volts to terminal 82a and wire to brake lights (or turn signal switch) to terminal 81...
Dale |
|
| mark66db |
Sun Apr 05, 2015 3:23 pm |
|
| ....thanks dale, i thought i tried every combination of wiring the 3, but ill get back to it... and, uh, NICE hat! |
|
Powered by phpBB © 2001, 2005 phpBB Group
|