| Hawaiianguy808 |
Wed Jan 13, 2016 7:18 pm |
|
| Hello my fellow bus owners. I need some help! I'm having a hard time removing the drivers seat frame. My bus does not have any padding on the seat frames so I just have the frame, springs, etc. How do you remove it? Any suggestions? |
|
| busdaddy |
Wed Jan 13, 2016 7:36 pm |
|
| Remove the frame from what?, the bus? |
|
| Hawaiianguy808 |
Wed Jan 13, 2016 9:23 pm |
|
| Sorry busdaddy! Remove the seat frame from the seat rails. I have a walk through bus and on the drivers side I can't get it off to the seat rails. I want to re-upholster it, but I'm having a hard time removing it. It seems as though it slides out of the seat rails, but I'm not too sure. |
|
| joe56vw |
Wed Jan 13, 2016 9:28 pm |
|
there should be a knob in front of the seat pull up on it to release the seat then push it forward
sometimes they are very sticky so if it doesn't move spray some WD-40 or PB blaster on it and the rails |
|
| EverettB |
Wed Jan 13, 2016 10:54 pm |
|
Check out this thread for more comments and photos
http://www.thesamba.com/vw/forum/viewtopic.php?t=635567 |
|
| Hawaiianguy808 |
Fri Jan 15, 2016 1:20 pm |
|
| Got it!! Thanks guys! I had to take a small wood block and line it up on the back part of the frame and hammer it out. I used WD-40 also. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|