TheSamba.com :: View topic

Mon Mar 14, 2016 9:48 pm

To link to this thread
Code: [url=http://www.thesamba.com/vw/forum/viewtopic.php?t=650351&highlight=]Cab Door ID T2[/url]

CAB DOOR ID

First off, thanks to everyone who posted data!

68 only, 2 access holes, pull knob lock, push button outer handle, 15mm pins
69 only, 2 access holes, lever door lock, 15mm pins
70-71 1 access hole, lever door lock, 15mm pins
72-73 riveted vent slide, lever door lock, 15mm pins
74-75 riveted vent slide, pull knob lock, 15mm pins
75-76 riveted vent slide, pull knob lock, 8mm pins
76-M77 welded vent slide, pull knob lock, 8mm pins
M77-79 welded vent slide, pull knob lock, 8mm pins, Check Strap changed

1968 only to Ch# 218 220 000
Lock pull knob by window, push button outer handle

1968-75 #3 to 215 2 153 712
15mm pins

1969-73 Ch# 219 000 001 to 213 2 300 000
lock moved next to release lever

1969-79
outer handle changed to pull lever, at some point key tumbler became not removable

1972-E76 from Ch# 212 2000 001 to 2162 047 257
vent introduced in door, rivited slide

1974-79
Door lock Pull knob moved back by the window

M75-M76 215 2 153 713 to 216 2 126 631
#(2A) transition? 9mm pins, countersunk hinge half

M76-79 216 2 126 632 to 219 2 300 000
#2A 9mm pins, threaded hinge half

1976-79 from 2162 047 257
Vent slide welded to door instead of riveted.

M77-79 from Ch# 2172 137 043
check strap changed

Hinge Half
>75 #2 15mm hole Countersunk mounting holes 1975 to 215 2 153 712
M75-M76 #(2A) transition? 9mm 215 2 153 713 to 216 2 126 631
M76-79 #2A 9mm 216 2 126 632 to 219 2 300 000

Hinge Washer
#6 either to 71 or from 72 ??

Hinge Pin
>75 15mm #3 to 215 2 153 712
1975-79 8mm 215 2 153 713 to 219 2 300 000
New front door hinges (from 236-2126-632)type2.com

Ventilation opening
1972 Ch# 212 2000 001 introduced in door
1976 from 2162 047 257 Vent slide welded to door instead of riveted.

Inner door lock
1968 Door lock Pull knob by the window
1969-73 Lever door lock moved next to release lever
1974-77 Door lock Pull knob moved back by the window

Outer door handle
1968 push button where key is inserted in middle of handle used to open door
1969-79 release lever on handle between handle and door cavity now squeezed to open door

Check Strap
1968-77 to Ch# 2172 137 042 wire spring with rollers, Strap vertical, Mounting holes ????
1977 from Ch# 2172 137 043 Nylon insert, Strap now horizontal and flat, Mounting holes ????

http://www.jerseylooker.com/FicheDump/EarlyBaywindow/EarlyBay-Main.html

http://www.jerseylooker.com/FicheDump/LateBaywindow/LateBay-Main.html

15mm Hinge halfs. To 75 #2 15mm hole Countersunk mounting holes 1975 to 215 2 153 712

M75-M76 transition? 8mm pin countersunk hinge 215 2 153 713 to 216 2 126 631

9mm Hinge half attached to door. Requires 8mm pin. 1975-79 215 2 153 713 to 219 2 300 000

[Left 15mm pin, countersunk hinge 68-M75][Middle transition hinge? 8mm pin, countersunk hinge M75-M76 ][Right 8mm pin, threaded hinge M76-79]

Hinge Washer
#6 either to 71 or from 72 ?? The parts manuals are in conflict with this one. Either the washers where dropped in 71 or added in72??

Early door pillar mount 68-M76

Late door pillar mount M76-79

Cab door hinge conversion kit. This 8mm cab door hinge pin conversion kit allows the fitting of early and late T2 doors (from T2s made between 1969-1976) to any T2 from 1967–1979.

Check Straps
1968-77 to Ch# 2172 137 042 wire spring with rollers, Strap vertical, Mounting holes ????

1977 from Ch# 2172 137 043 Nylon insert, Strap now horizontal and flat, Mounting holes ????

Front door hinges - Conflicting Information
Bay Window Front Door Latch Problems
Replacing the '69-79 Bus Front Door Lock Spring
Installing Door Panels
Restore, Rebuild, Refurbish Front Door
door check sound like a gun shot?
(door) Vapor Barrier Replacement How-To, Colin

Please post any revisions or additional information.
Thank you
Tcash

Wed Oct 27, 2021 7:47 am

Hi guys.
How did you manage to get out the pin and make one oversize on the fixed part please?