| jkmcrg |
Sat Feb 04, 2017 1:40 pm |
|
| Dosassembling all the things - on the brake system today. Need to drain the lines, I feel like the typical bleed procedures dont apply in this scenario and are inefficient. Cracked a caliper drain plug and pumped brakes and a little came out , but I feel like there needs to be a way to just let it drain - introduce air at the top of the system - any way to do this? Cracked open a couple of the lines on the master cylinder to no avail. |
|
| Terry Kay |
Sat Feb 04, 2017 1:46 pm |
|
| Tske the cap off of the master cylinder, open all of the bleeders. |
|
| jkmcrg |
Sat Feb 04, 2017 2:21 pm |
|
Terry Kay wrote: Tske the cap off of the master cylinder, open all of the bleeders.
Thanks that did it! I opened the last one, rear left, and it all pumped through. I guess I have a poor understanding of hydraulics, as I thought just opening one would do it |
|
| Terry Kay |
Sat Feb 04, 2017 3:28 pm |
|
| BINGO ! |
|
Powered by phpBB © 2001, 2005 phpBB Group
|