| 67BusNovaScotia |
Tue Aug 06, 2024 6:05 pm |
|
| Hello everyone, my 67 Bus front camber changes from positive to negative when I go from forward to backwards. Anyone able to help. I replaced link pins and they seem to be solid without play now. |
|
| BarryL |
Tue Aug 06, 2024 6:24 pm |
|
| King pins good and without play? Wheel bearings good and adjusted ? Inner races tight on spindle? |
|
| 67BusNovaScotia |
Tue Aug 06, 2024 6:42 pm |
|
| Thanks for the reply. The link pins and bushes are good. The ping Pin seems tight but I will check again tomorrow along with wheel Bearings. Any chance it has something to do with torsion arms? The seals seam solid and stable with out any play when the camber changes. It looks like the alignment may be toed in a bit as well. Can that affect camber? |
|
| pyrOman |
Wed Aug 07, 2024 9:03 am |
|
67BusNovaScotia wrote: It looks like the alignment may be toed in a bit as well. Can that affect camber?
Yes, however, it should not be visibly obvious. Toe-in should only be 1/8 of an inch between the front of the tires and the back. 8) |
|
| chrisflstf |
Wed Aug 07, 2024 10:20 am |
|
How are you measuring it? How much does it change?
Bent wheels would be a likely cause |
|
Powered by phpBB © 2001, 2005 phpBB Group
|