Bobnotch |
Sat Sep 19, 2020 3:55 pm |
|
vwfye wrote: At the LFTS getting front tires/wheels mated. Shpuld have them on the pan this afternoon. Small progress, but progress.
Pics or it didn't happen. You know the rule. :wink: :lol: |
|
vwfye |
Sat Sep 19, 2020 4:01 pm |
|
Was waiting until I had installed them.
|
|
Bobnotch |
Sat Sep 19, 2020 4:11 pm |
|
vwfye wrote: Was waiting until I had installed them.
Looks good. What size did you go with? For a drag car I'd have thought you'd go with a narrow tire. |
|
vwfye |
Sat Sep 19, 2020 4:14 pm |
|
175/55r15. I still want a contact patch if I need to panic brake. |
|
Bobnotch |
Sat Sep 19, 2020 4:49 pm |
|
vwfye wrote: 175/55r15. I still want a contact patch if I need to panic brake.
Ok, I don't blame you. Rob likes how low it sits, but didn't see the bottom beam clamps holding the front up off the ground. :wink: He likes how it's moving along though. 8) |
|
vwfye |
Sat Sep 19, 2020 5:07 pm |
|
That is because it isn't clamped. |
|
vwfye |
Tue Sep 22, 2020 9:09 am |
|
The ride height target is 4 inches at the bottom of the frame head and 3.5 at the bell housing at the rear. So, more rear adjusting to come after the new rear subframe is installed. |
|
vwfye |
Sat Sep 26, 2020 10:14 pm |
|
So, still moving forward:
The exhaust is on its way
The front suspension is complete.
And the rear IRS changes are happening
|
|
Bobnotch |
Sun Sep 27, 2020 8:21 am |
|
So have you checked your CV clearance yet? Just asking as you are building a Drag car with that rear sub.
The rest of the parts look good, and the beam looks good bolted in place. |
|
vwfye |
Sun Sep 27, 2020 1:53 pm |
|
I have some options still, as I won't be running torsion bars. |
|
vwfye |
Thu Oct 01, 2020 8:18 pm |
|
Body is going back on the rolling pan Saturday! Woot! |
|
Bobnotch |
Thu Oct 01, 2020 8:36 pm |
|
vwfye wrote: Body is going back on the rolling pan Saturday! Woot!
Cool. I want to see some pics of it on the pan. :twisted: |
|
vwfye |
Thu Oct 01, 2020 8:40 pm |
|
You and me both! |
|
vwfye |
Fri Oct 02, 2020 6:07 pm |
|
Seat/base position is set. So, after the body goes on, the seat will be mounted and then on to wiring... woot!
|
|
vwfye |
Sat Oct 03, 2020 3:20 pm |
|
2 old guys, 1 engine hoist and 75 minutes. It is on!
|
|
Bobnotch |
Sat Oct 03, 2020 6:16 pm |
|
Nice. 8) Looks good on there with those rims. =D> I didn't realize that had a full Mickey on it. :wink: |
|
vwfye |
Sat Oct 03, 2020 6:38 pm |
|
Yup. 1965. The nose will go lower, but it was easier to move at that height. |
|
djway3474 |
Sat Oct 03, 2020 9:46 pm |
|
OLD GUYS RULE
THE OLDER WE GET
THE BETTER WE WERE |
|
vwfye |
Mon Oct 05, 2020 4:19 pm |
|
Now, now I am happy with the stance in the front.
|
|
Tram |
Mon Oct 05, 2020 5:40 pm |
|
vwfye wrote: Now, now I am happy with the stance in the front.
I'm not. Fix it. :x |
|
Powered by phpBB © 2001, 2005 phpBB Group
|