TDCTDI |
Wed Oct 16, 2024 9:01 am |
|
After drilling out the rest of the holes, I slid the seat track into a seat to ensure correct alignment of the tracks.
I then set the assembly onto the pan & positioned it back up to the lines.
And tacked it in place.
Once secured, I removed the seat, flipped the pan over & began filling in the holes.
|
|
TDCTDI |
Thu Oct 17, 2024 7:57 am |
|
This morning I plugged up the rest of the holes.
And started knocking down the high spots.
And then buffed them off with a Scotch Brite surface pad.
|
|
TDCTDI |
Sat Oct 19, 2024 9:28 am |
|
Today’s endeavors consisted of knocking down the rest of the welds with a cutoff wheel.
Grind them flush with a sanding disc.
And finish them off with a scotchbrite pad.
|
|
madster |
Thu Nov 07, 2024 9:50 am |
|
=D> |
|
Powered by phpBB © 2001, 2005 phpBB Group
|