| Bhmyers |
Sat Sep 18, 2021 9:58 am |
|
I bought my 62 from someone who had started it as a project. It didn’t have the rear side trays in it so I bought the left from WW, the right is on back order. I cant figure out how this fits in here, it seems to be too long. Help.
|
|
| Larmo63 |
Sat Sep 18, 2021 12:04 pm |
|
| Better pictures will help you here.... |
|
| Bhmyers |
Sat Sep 18, 2021 4:16 pm |
|
Larmo63 wrote: Better pictures will help you here....
Here’s another photo
|
|
| 67rustavenger |
Sat Sep 18, 2021 4:33 pm |
|
Wait, you had time to paint your finger nails between the pic posts? :shock:
After market parts suck.
If it were me. I'd trim the forward part of the tray. So the rear triangle meshes up with the body.
Make sure to leave enough metal to recreate the flanged bits at the forward end of the side tray.
It looks like you need to trim 3/4". Remember don't forget the flange re-fabrication. You need to measure carefully.
Good Luck |
|
| viiking |
Sat Sep 18, 2021 5:58 pm |
|
| Agree, but don't cut anything until you make sure the engine seal and the tins fit. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|