yel-mel |
Thu Sep 29, 2022 1:35 pm |
|
My coil wires and connections have seen much better days.
I am going to make up some new ones.
What gage / strand is recommended? |
|
Semper_Dad |
Thu Sep 29, 2022 3:36 pm |
|
Schematic calls for 1.5 MM for the positive coil wire (Circuit 15). That translates to 14GA.
Coil to Reverse switch also 1.5MM. In fact, entire reverse circuit is 1.5MM.
Coil to Choke and Pilot Jet is a .5MM (24GA) I don't see any reason not to use the 1.5MM (14GA)
This Chart can be useful.
https://www.firemountaingems.com/resources/encyclobeadia/charts/6404
Hope you faired well during the hurricane. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|