| Derickpete |
Tue May 13, 2025 2:01 pm |
|
| What length shock, extended length and collapsed length is used for a Warrior beam with 8” towers and stock arms. I’m measuring 19” extended and 14” collapsed. Is this correct? |
|
| Schepp |
Tue May 13, 2025 2:16 pm |
|
| You answered your own question. |
|
| Derickpete |
Tue May 13, 2025 2:27 pm |
|
| From what I understand the 8” beam means 8” shock stroke. I’m getting 5” of stroke. So what is the correct shock. |
|
| BFB |
Tue May 13, 2025 5:24 pm |
|
8" beam typically means 8" wider.
but even if we go with your theory and its 8" towers, the tower doesn't matter. you could have 8 foot towers and you'd still have the same amount of travel out of stock arms. |
|
| jsturtlebuggy |
Tue May 13, 2025 8:24 pm |
|
8in tall shock tower on either a stock or widen beam, the most common shock that has been used is the rear shock from a 1968-1979 VW Bus
The KYB 5530 was a commonly used shock although the valving may be stronger then you need |
|
| Derickpete |
Tue May 13, 2025 8:53 pm |
|
| Thank you. I will look into them. |
|
| Derickpete |
Sat May 17, 2025 2:45 pm |
|
| Update: The bus shocks worked perfectly for my beam. Thank you for the input. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|