| tommylg |
Mon May 26, 2025 6:19 am |
|
'72 Super
I did a search but did not find any reference to the 4 way connector for the wiper motor wiring to the main harness.
I have checked all the usual retailers and all I found was a shaded/shrouded one way with a male terminal on each end.
The one I am sourcing has a long male spade on the wiper motor harness that slides thru the shroud to connect the female spade.
The front lights have the 4 way - I need one more.
Hope this is not too confusing.
Have a great Memorial Day,
Tommy
The front lights have a 4 way.
Edit: the connector connects 4 wires from the wiper motor to the main harness ie. 8 connections. |
|
| ashman40 |
Mon May 26, 2025 9:38 am |
|
tommylg wrote: I did a search but did not find any reference to the 4 way connector for the wiper motor wiring to the main harness.
Edit: the connector connects 4 wires from the wiper motor to the main harness ie. 8 connections.
I'm guessing from your description you are looking for a wire junction like this?
This one is from the left rear taillight junction tucked behind the tar paper on the left side of the engine. It allows a junction point for 4 separate wire circuits.
I don't know where you can find anything like this from the aftermarket. If you really want something that look like the OE part you will need to find a used one.
If you don't care if it looks original and are only concerned with functionality...
Use four of these junctions to reproduce the connection:
https://www.jbugs.com/product/WW-CON.html
Note: JBugs sells a 4-way junction but these do not keep the wires separate. It creates a single junction where all 4-wires come together. That is not what you are looking for.
Alternatively, a "terminal block" can be used as a junction point for separate circuits. Here are some options.
https://www.amazon.com/dp/B0BBLX5H67/ (This one can be cut to size the number of circuits you want)
https://www.amazon.com/dp/B09VT1KHZL/ (This one is common and uses ring or spade terminals at the ends of the wires.
Neither is stock looking but functionally they get the job done. |
|
| OldSchoolVW's |
Mon May 26, 2025 11:28 am |
|
ashman40 wrote: I'm guessing from your description you are looking for a wire junction like this?
I don't know where you can find anything like this from the aftermarket. If you really want something that look like the OE part you will need to find a used one.
From the Samba classifieds:
https://www.thesamba.com/vw/classifieds/detail.php?id=2696504
Not exactly like the original, but you can trim to how many attached connectors you want. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|