TheSamba.com :: View topic

Tue Jun 03, 2025 4:07 pm

Hi everyone :wave:, long time lurker; first time poster; '95 EVC owner/restorer.

I'm looking for replacements or fabrication advice to replace the two nets covering the storage nooks? The pegs that hold them in have all but rusted away and string on one has come unraveled.

I've searched a few of the usual - gowesty, these places https://1705.net/resources/.

This is for a '95 Eurovan camper (Winnebago).

Thank you!

Tue Jun 03, 2025 6:00 pm

I took off the doors on that closet behind those cubbies. I found cargo nets on
Amazon that fit the closet well.

Tue Jun 03, 2025 6:03 pm

IF you could find the right U-Net string pocket, it would be simple to just screw it in on the face of the panel. It would eliminate the need to utilize the existing batch of holes with anything other than a direct replacement (which isn't readily available).

something like this ... https://www.amazon.com/Framed-Stretch-Pocket-Organization-Storage/dp/B07H653ZBZ

Thu Jun 05, 2025 11:17 am

HeyCrutch wrote: IF you could find the right U-Net ...

Thanks for the replies. Yeah, I was looking at those too! The challenge, as you say, is finding that size that is just wide enough to screw into panel surround complicated by the fact that they are different sizes top and bottom.

I did find this, which will work almost perfectly on the bottom and maybe I can trim it down to fit the bottom and then just 3d print a frame or catch clips for the existing holes.

[url] https://www.amazon.com/Barrier-Stretch-Pocket-Organization-Storage/dp/B0CMVXF2CN? [/url]