| kaferfahrt |
Mon Jun 30, 2025 8:40 pm |
|
This turn signal switch does not fit around the steering column that came with my '57 Oval bug. The right side of the housing fits the column perfectly, but the back of the left side is not shaped to wrap around the column. Am I not looking at installation correctly or is this the wrong switch?
|
|
| finster |
Tue Jul 01, 2025 2:44 am |
|
| are there any markings inside either part? I'm sure the ones on vws had a straight stalk and I suspect the switch side and clamp side are for different cars - surely to clamp a column it would need to have matching diameters? :? |
|
| kaferfahrt |
Tue Jul 01, 2025 5:51 am |
|
Both sides of the housing are marked SWF and I find VW marks on the left side of the housing and on the switch itself.
|
|
| kaferfahrt |
Tue Jul 01, 2025 6:09 am |
|
| I'm starting to suspect this switch is for a transporter, not for a bug. And it has a bent arm. |
|
| 56Cabrio |
Tue Jul 01, 2025 10:50 am |
|
kaferfahrt wrote: I'm starting to suspect this switch is for a transporter, not for a bug. And it has a bent arm.
Is there a part number on the switch ?
113953513A 1956-1959 Bug
https://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=113953513A
211953513E is for a bus
https://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=211953513F |
|
| kaferfahrt |
Tue Jul 01, 2025 6:11 pm |
|
| No part numbers that I can see. |
|
| kaferfahrt |
Sun Jul 27, 2025 7:07 am |
|
| Can anybody help identify this turn signal switch? I went ahead and bought another that fits my '57 bug, but I need to identify this one so I can sell it! |
|
| Jacks |
Sun Jul 27, 2025 7:42 am |
|
| The housing that the switch is screwed in to is for a VW bus. The C shaped piece is for bug or Ghia, or 356. The other half of the clamp is also bug Ghia or 356. It’s a miss matched combination. The actual switch itself will work on all those models |
|
Powered by phpBB © 2001, 2005 phpBB Group
|