TheSamba.com Forums   Forum Index -> Vintage Speed -> N10 811 1 Fillister Head AM 5 X 8 DIN 85 Machine Screw   View original topic: N10 811 1 Fillister Head AM 5 X 8 DIN 85 Machine Screw klcarrie Wed Aug 13, 2025 10:14 am Hi all, Looking for information on the machine screws that hold the 6v Voltage Regulator onto early (36 and 40hp) generators. I need 2, and would like to source them in Canada, if possible. I found 2 vendors internationally delivering screws with the N10 811 1 specification, but these were sourced from later model vehicles, for use in other applications (for use in steering wheels, and ignition switch surrounds, not that it really mattes). My internet search has not otherwise informed me of what the AM designation is. I am assuming the Fillister Head screws i am looking for are 5 mm with a 0.8 mm thread. I do not wish to bugger up my threads on the generator, so I am being extra cautious. Any discussion/information in support of my search would be appreciated. Kevin M5 x 0.8 8mm length earthquake Sat Nov 08, 2025 9:22 pm I think that is a cheese head screw, McMaster-Carr sells them pretty cheap. https://www.mcmaster.com/products/round-head-screw...ead+screws eQ Powered by phpBB © 2001, 2005 phpBB Group