| timdhawk |
Tue Nov 04, 2025 12:33 pm |
|
I forgot what goes in this hole after I tore it down! The one in the corner, not the body mount hole.
Thanx
|
|
| Bobs67vwagen |
Tue Nov 04, 2025 4:15 pm |
|
| If you mean the 2nd hole down from top right that is the bolt hole for the upper rear seat back. |
|
| busdaddy |
Tue Nov 04, 2025 4:17 pm |
|
| Or between the dynamat and heater tube on the step? I think that's a drain for the paint dip process, rubber plug if it is. |
|
| timdhawk |
Wed Nov 05, 2025 1:21 pm |
|
Sorry.... this hole.
|
|
| viiking |
Wed Nov 05, 2025 6:51 pm |
|
I believe nothing goes in that hole. My archival photos of a 68 and 70 show the seam sealer looks very messy in that area and there seems to be an "island" of seam sealer away from the straight linear seal.
I believe busdaddy is right and that it is a vent line to prevent air locks under the rear shell during the dipping process. Don't remember a rubber plug though. |
|
| busdaddy |
Wed Nov 05, 2025 7:18 pm |
|
Glued on metal disc (coin) or a sticker of some sort?
As the body emerges from it's bath nose up that's a low spot that needs to drain off. |
|
| viiking |
Wed Nov 05, 2025 7:24 pm |
|
| The glued on tokens are up on the flat of the shelf. |
|
| timdhawk |
Thu Nov 06, 2025 1:38 pm |
|
| Thanx everyone. I'll just plug them up with something and move on...! |
|
Powered by phpBB © 2001, 2005 phpBB Group
|