| edhnb |
Mon May 06, 2024 9:49 am |
|
| I need a replacement injector plastic connector. One of mine is cracked. I can't seem to find a supplier. Can anyone point me in the right direction? Thanks! |
|
| metahacker |
Mon May 06, 2024 9:51 am |
|
I believe this is what you seek
https://www.google.com/search?q=Bosch+EV1+Jetronic+connector |
|
| edhnb |
Mon May 06, 2024 10:16 am |
|
metahacker wrote: I believe this is what you seek
https://www.google.com/search?q=Bosch+EV1+Jetronic+connector
Haha. Thank you! My google skills are lacking this morning :) |
|
| edhnb |
Mon May 06, 2024 10:17 am |
|
| Another quick question.. is it the same exact connector type for the cold start valve etc..? |
|
| airschooled |
Mon May 06, 2024 10:26 am |
|
Same connector. CSV was blue, TTS brown, and AAR black.
Injectors came in a few colors, bus wiring harnesses were usually blue for the injectors and electronic EGR if ya have it.
Robbie |
|
| SGKent |
Tue May 07, 2024 6:39 pm |
|
| napa has them and so does amazon. Some people use colored shrink tubing on the wires instead of the colored ones. The crimps are really small. Make sure you have the right tool if you get the crimp on style. |
|
| Wildthings |
Wed May 08, 2024 2:56 am |
|
| I agree with Steve, these should be available through NAPA. I would get or make a tool for removing the old terminals from the plastic connector to avoid having to make a splice. |
|
| edhnb |
Wed May 08, 2024 1:46 pm |
|
Wildthings wrote: I would get or make a tool for removing the old terminals from the plastic connector to avoid having to make a splice.
It worked. Thank you! |
|
| mikedjames |
Thu May 09, 2024 10:41 am |
|
Over here , I found a bag of eight connectors cost £15, and a single connector cost £13..
Also same connector as a Ford VR crank sensor .. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|