Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts New!  See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Search found 140 matches
Forum Index Page: 1, 2, 3, 4, 5, 6, 7  Next
Author Message
  Topic: oil breather valve FI upgrade or not?
05gh

Replies: 1
Views: 98

PostForum: Bay Window Bus   Posted: Tue Jan 26, 2021 2:28 pm   Subject: oil breather valve FI upgrade or not?
I have looked around for a breather valve (PVC) on a T4 fuel injection. But thy are stuk as suspected afther 40+ years.
There is a treat https://www.thesamba.com/vw/forum/viewtopic.php?t=733700& ...
  Topic: where does this wire goes?
05gh

Replies: 1
Views: 198

PostForum: Bay Window Bus   Posted: Mon Jun 15, 2020 2:57 pm   Subject: where does this wire goes?
I m re-installing the engine and now 2 wires left over? please some help. (2 liter fuel injection CA model).
The first foto, the wiringloom connects the fan and then a 2 wire loom goes to the engine. ...
  Topic: how to set the preload on the 091 carrier bearings?
05gh

Replies: 8
Views: 319

PostForum: Bay Window Bus   Posted: Wed Jun 10, 2020 4:48 pm   Subject: Re: how to set the preload on the 091 carrier bearings?
Yes I did a check in both directions and with a load on the drive shaft. I'm learning by doing en reading. Now I know to measure before Wink . But the bearing adjuster are close to original setting ...
  Topic: how to set the preload on the 091 carrier bearings?
05gh

Replies: 8
Views: 319

PostForum: Bay Window Bus   Posted: Wed Jun 10, 2020 4:04 pm   Subject: Re: how to set the preload on the 091 carrier bearings?
I have only replaced the tapered roller bearing on both sides. Set the preload on 1 inch en check the backlash average 0.18mm and finally a pattern check with yellow gear compound. I think this patte ...
  Topic: how to set the preload on the 091 carrier bearings?
05gh

Replies: 8
Views: 319

PostForum: Bay Window Bus   Posted: Mon Jun 01, 2020 4:34 am   Subject: Re: how to set the preload on the 091 carrier bearings?
Home made 381/8 tool. The fitting feels like putting on the clutch housing. The difference in reading between with or with-out the tool is approximate 1" by zero play. So in my case with out the ...
  Topic: how to set the preload on the 091 carrier bearings?
05gh

Replies: 8
Views: 319

PostForum: Bay Window Bus   Posted: Sun May 31, 2020 1:29 pm   Subject: Re: how to set the preload on the 091 carrier bearings?
Thanks for your advice, just copy en paste Smile I have replace the taperd-roller bearing (SKF) on both sides. Based on what I have understand you could turn the adjusting ring back on factory setting ( ...
  Topic: how to set the preload on the 091 carrier bearings?
05gh

Replies: 8
Views: 319

PostForum: Bay Window Bus   Posted: Sun May 31, 2020 2:49 am   Subject: how to set the preload on the 091 carrier bearings?
On post (seel link below) there is a lof of information on preload setting. But how do a measure and what is the right set up? https://www.thesamba.com/vw/forum/viewtopic.php?t=630932&start=220&am ...
  Topic: cilinderhead oil spill?
05gh

Replies: 9
Views: 433

PostForum: Bay Window Bus   Posted: Thu May 14, 2020 2:46 pm   Subject: Re: cilinderhead oil spill?
It looks to me like that oil is tracking down the studs from the head nuts inside the rocker box. For that much oil to be via the cylinders wouldn't you be followed by a cloud of smoke?

It is not r ...
  Topic: cilinderhead oil spill?
05gh

Replies: 9
Views: 433

PostForum: Bay Window Bus   Posted: Tue May 12, 2020 1:46 pm   Subject: Re: cilinderhead oil spill?
update: closer look after removing the tin. The breather box is wet from oil could that cause of the oil on the cilinder?

https://www.thesamba.com/vw/gallery/pix/2038733.jpg
https://www.thesamba.c ...
  Topic: flywheel can it be saved?
05gh

Replies: 2
Views: 161

PostForum: Bay Window Bus   Posted: Sun May 10, 2020 4:26 am   Subject: flywheel can it be saved?
Due to, I think, the massive oil leak, I found burn marks? on the flywheel afther cleaning with breakfluid. Can I reuse this flywheel?

https://www.thesamba.com/vw/gallery/pix/2037394.jpg
  Topic: cilinderhead oil spill?
05gh

Replies: 9
Views: 433

PostForum: Bay Window Bus   Posted: Sat May 09, 2020 2:24 pm   Subject: Re: cilinderhead oil spill?
It looks to me like that oil is tracking down the studs from the head nuts inside the rocker box. For that much oil to be via the cylinders wouldn't you be followed by a cloud of smoke?

Thanks for ...
  Topic: cilinderhead oil spill?
05gh

Replies: 9
Views: 433

PostForum: Bay Window Bus   Posted: Sat May 09, 2020 2:17 am   Subject: Re: cilinderhead oil spill?
The engine runs great and there is no smoke. The reason why the engine is out of the car it need new sealing and clutch. Then I discovered that the engine mount are worn out. By replacing I found out ...
  Topic: cilinderhead oil spill?
05gh

Replies: 9
Views: 433

PostForum: Bay Window Bus   Posted: Fri May 08, 2020 1:56 pm   Subject: Re: cilinderhead oil spill?
As suggested by turning over the moter is makes a PSST sound on cilinder side 1 and 2. So I guess the next step will be take off the head and see what wrong. (I will post the results)
  Topic: cilinderhead oil spill?
05gh

Replies: 9
Views: 433

PostForum: Bay Window Bus   Posted: Fri May 08, 2020 4:02 am   Subject: cilinderhead oil spill?
cilderhead 3 and 4 are clean but on 1 and 2 there is oil spill between de cilinder and the head. Even de tin is covered with oil right above the cilder and head. There is no oil spil between the cilin ...
  Topic: 6-ribs transaxle inner rease bearing worn out
05gh

Replies: 0
Views: 52

PostForum: Bay Window Bus   Posted: Wed Mar 20, 2019 1:49 pm   Subject: 6-ribs transaxle inner rease bearing worn out
I have a 6-ribs transaxle (091 301 103) it drives and shift fine. But its noise and as told the inner bearings from the differential are worn out. Question can they be replaced or does it need re-adju ...
  Topic: tail pipe with oxygen sonde for FI bus will it work?
05gh

Replies: 9
Views: 346

PostForum: Bay Window Bus   Posted: Sat Jun 16, 2018 3:00 pm   Subject: Re: tail pipe with oxygen sonde for FI bus will it work?
https://www.thesamba.com/vw/gallery/pix/1791688.jpg

Thanks @Ray, great artical I'm beginning to understand that placing the oxygen sonde in the tail pipe is not a good idea.
Thats massive CA 1979 ...
  Topic: tail pipe with oxygen sonde for FI bus will it work?
05gh

Replies: 9
Views: 346

PostForum: Bay Window Bus   Posted: Fri Jun 15, 2018 3:59 pm   Subject: Re: tail pipe with oxygen sonde for FI bus will it work?
https://www.thesamba.com/vw/gallery/pix/954970.jpg
Yes it makes more sense the pleace the oxygen sensor in front but the mufler is bolted directly on the heaterboxes
  Topic: tail pipe with oxygen sonde for FI bus will it work?
05gh

Replies: 9
Views: 346

PostForum: Bay Window Bus   Posted: Fri Jun 15, 2018 2:54 pm   Subject: tail pipe with oxygen sonde for FI bus will it work?
https://www.thesamba.com/vw/gallery/pix/1791460.jpg
The california heaterbox and catalist has been replaced by standard heaterbox and mufler. And now I want to relocate the oxygen sensor as show on f ...
  Topic: Fuel Injection Vacuum Hoses missing
05gh

Replies: 0
Views: 179

PostForum: Bay Window Bus   Posted: Wed Jun 06, 2018 2:38 pm   Subject: Fuel Injection Vacuum Hoses missing
https://www.thesamba.com/vw/gallery/pix/1788319.jpg
(picture is from ratwell.com)
the rubber hoses where gone/falling apart and I have replaced them but now the enigine is running at higher RPM in i ...
  Topic: oil leakage from oil cooler?
05gh

Replies: 37
Views: 1449

PostForum: Bay Window Bus   Posted: Tue Jun 05, 2018 2:39 pm   Subject: Re: oil leakage from oil cooler?
https://www.thesamba.com/vw/gallery/pix/1788010.jpg
temperature sensor connected to VDO Thermometer.
Question how to callibrate? I guess the temperature is higher then the reading of 180F
 
Page 1 of 7 Page: 1, 2, 3, 4, 5, 6, 7  Next
All times are Mountain Standard Time/Pacific Daylight Savings Time
Jump to:  

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2020, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB