Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts New!  See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Search found 15 matches
Forum Index
Author Message
  Topic: Syncro locker vacuum hose routing
Dirtyhippy

Replies: 10
Views: 2601

PostForum: Vanagon   Posted: Sun Feb 14, 2016 7:31 pm   Subject: Re: Syncro locker vacuum hose routing
Got the punches out and gently tapped the roll pin into the diff lock pin.https://www.thesamba.com/vw/gallery/pix/1465333.jpg
Wasn't happy with the result so I tapped a little more and dragged my lea ...
  Topic: Syncro locker vacuum hose routing
Dirtyhippy

Replies: 10
Views: 2601

PostForum: Vanagon   Posted: Sun Feb 14, 2016 1:51 pm   Subject: Re: Syncro locker vacuum hose routing
I drove the Van around for 15 minutes on a gravel road, swerving, turning , a lot...... Pin drives only about halfway into the cylinder. Could it be that the po replaced things and the roll pin was pu ...
  Topic: Syncro locker vacuum hose routing
Dirtyhippy

Replies: 10
Views: 2601

PostForum: Vanagon   Posted: Sat Feb 13, 2016 4:40 pm   Subject: Re: Syncro locker vacuum hose routing
Testing tomorrow. I will post a new update, pictures, et cetera.
  Topic: Syncro locker vacuum hose routing
Dirtyhippy

Replies: 10
Views: 2601

PostForum: Vanagon   Posted: Sat Feb 13, 2016 4:08 pm   Subject: Re: Syncro locker vacuum hose routing
I hooked up a mighty vac to everything and tested. It all seemed to hold. Then checked the hg at the manifold line, it went to 15 hg, then hooked it all back up again, then it started to work. I'm won ...
  Topic: Dash light twist lock bulb holders
Dirtyhippy

Replies: 4
Views: 552

PostForum: Vanagon   Posted: Fri Feb 12, 2016 12:23 pm   Subject: Re: Dash light twist lock bulb holders
Subaru consoles. Hit the junkyard. I have a bag of them from my last trip. Filled my pockets with em. Also found an unused in bag vanny Jack and an original tool kit.
  Topic: Syncro locker vacuum hose routing
Dirtyhippy

Replies: 10
Views: 2601

PostForum: Vanagon   Posted: Fri Feb 12, 2016 12:19 pm   Subject: Syncro locker vacuum hose routing
I am trouble shooting my locker. Everything seems to be solid, junctions aren't loose, hoses aren't cracked, actuator moves if I blow into it. Just don't seem to be getting a vacuum. Where does the va ...
  Topic: Fresh water level sensor
Dirtyhippy

Replies: 16
Views: 3487

PostForum: Vanagon   Posted: Sat Jul 04, 2015 3:55 am   Subject: Fresh water level sensor
...next thing you know, joker would want me to remove the gas heater...😂I just enjoy the safer side of the design
  Topic: Fresh water level sensor
Dirtyhippy

Replies: 16
Views: 3487

PostForum: Vanagon   Posted: Fri Jul 03, 2015 3:15 pm   Subject: Fresh water level sensor
Figured out the green wire....but I got the shore power before. Guess it's just a heavy duty ground. And tinkered with the black wire down below that needs a new spade terminal but I'm not getting any ...
  Topic: Fresh water level sensor
Dirtyhippy

Replies: 16
Views: 3487

PostForum: Vanagon   Posted: Tue Jun 30, 2015 6:15 pm   Subject: Fresh water sensor
Got a few wires unplugged from the water freshwater tank and such. Help?

https://www.thesamba.com/vw/gallery/pix/1371392.jpg
https://www.thesamba.com/vw/gallery/pix/1371391.jpg
https://www.thesam ...
  Topic: Fresh water level sensor
Dirtyhippy

Replies: 16
Views: 3487

PostForum: Vanagon   Posted: Sat Jun 13, 2015 12:44 pm   Subject: Fresh water level sensor
Got a new gremlin. When I turn on the faucet , the fridge indicator light turns on!!!! No water level..... Wifey swears it all
Worked last year.... Now I dunno. Help? Pics? d'oh!
  Topic: Eberspacher ba6
Dirtyhippy

Replies: 11
Views: 1291

PostForum: Vanagon   Posted: Wed Jun 03, 2015 11:23 am   Subject: Eberspacher ba6
From experience its always the combustion blower or safety switch. If the capacitors are cooked for the combustion blower points replace them, I went to an electronics supply store and they had some ...
  Topic: Eberspacher ba6
Dirtyhippy

Replies: 11
Views: 1291

PostForum: Vanagon   Posted: Tue Jun 02, 2015 10:46 pm   Subject: Eberspacher ba6
Sooooo.....no spark. Tried switching out the coil with one from an old scooter and nothing. However, when I bench tested the glow plug I obtained a beautiful white and blue spark. So the plug is good, ...
  Topic: Eberspacher ba6
Dirtyhippy

Replies: 11
Views: 1291

PostForum: Vanagon   Posted: Mon Jun 01, 2015 10:05 pm   Subject: Eberspacher ba6
Now, if the safety switch is tripped, will it kill everything or just spark or fuel...?
  Topic: Eberspacher ba6
Dirtyhippy

Replies: 11
Views: 1291

PostForum: Vanagon   Posted: Tue May 12, 2015 11:32 pm   Subject: Eberspacher ba6
Well, now I know how to take it apart and clean the points but it still hasn't fixed the issue. Now I need a new flange clamp and possibly a new shell for the combustion fan because a two inch chunk f ...
  Topic: Eberspacher ba6
Dirtyhippy

Replies: 11
Views: 1291

PostForum: Vanagon   Posted: Tue May 12, 2015 12:00 am   Subject: Eberspacher ba6
Have an 83.5 with all the right parts and no heat. One stray
Wire hanging from rear of safety switch, grey and blue, no idea where we go. Bentley doesn't even show this one. Pump will fire with direc ...
 
Page 1 of 1
All times are Mountain Standard Time/Pacific Daylight Savings Time
Jump to:  

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2020, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB