Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts New!  See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Search found 9 matches
Forum Index
Author Message
  Topic: CB Magnaspark
mike karp

Replies: 31
Views: 12705

PostForum: Performance/Engines/Transmissions   Posted: Mon Jun 11, 2012 5:05 pm   Subject: CB Magnaspark
I run the mechanical magnaspark in my 1776, w110, 1.25 rockers, 44idf's. I run a Mallory hyfire 4 cdi ignition with it. I like it alot! I haven't tried different advance rates, I'm still dialing in my ...
  Topic: 1776 44mm Jetting?
mike karp

Replies: 12
Views: 2319

PostForum: Performance/Engines/Transmissions   Posted: Sat May 26, 2012 8:50 am   Subject: 1776 44mm Jetting?
I have a very similar setup, 1776, w110, 8:1, 40x35.5 valves. I used 32 vents, and I am at a 40 idle jet and it still runs rich to 2500 rpms, then I feel the mains kick in and it really takes off. I'm ...
  Topic: Swingaxle Sway Bar
mike karp

Replies: 35
Views: 6327

PostForum: Performance/Engines/Transmissions   Posted: Wed Feb 29, 2012 10:22 am   Subject: Swingaxle Sway Bar
I, like a few other posters have a heavier duty front sway bar and the rear sway bar. I have been quite happy with it. To be honest I have been collecting original parts for a z-bar as the theory behi ...
  Topic: Swingaxle Sway Bar
mike karp

Replies: 35
Views: 6327

PostForum: Performance/Engines/Transmissions   Posted: Wed Feb 29, 2012 10:21 am   Subject: Swingaxle Sway Bar
I, like a few other posters have a heavier duty front sway bar and the rear sway bar. I have been quite happy with it. To be honest I have been collecting original parts for a z-bar as the theory behi ...
  Topic: Custom Fan Shroud Pictures
mike karp

Replies: 28
Views: 4548

PostForum: Performance/Engines/Transmissions   Posted: Mon Feb 20, 2012 2:11 pm   Subject: Custom Fan Shroud Pictures
While it's not my bag, and may not be the best engineering, thanks for sharing your project. I am often afraid to put some of my ideas out on this forum even though I frequently read the topics to lea ...
  Topic: 78 mm crank build
mike karp

Replies: 12
Views: 1912

PostForum: Performance/Engines/Transmissions   Posted: Fri Dec 02, 2011 8:38 am   Subject: 78 mm crank build
Awesome. Thanks again for the info. Between here and STF, ive gotten alot of useful info. Im gonna keep the sump, move to the plugged 26 mm oil pump, do the hoover oiling improvements, and im now thin ...
  Topic: 78 mm crank build
mike karp

Replies: 12
Views: 1912

PostForum: Performance/Engines/Transmissions   Posted: Mon Nov 28, 2011 9:51 am   Subject: 78 mm crank build
Ok. Very good reading. One question what would stop me from using 1.4 ratio rockers with the w110? Brings the lift close to the fk44 and duration of the fk43. Am I correct in assuming this would make ...
  Topic: 78 mm crank build
mike karp

Replies: 12
Views: 1912

PostForum: Performance/Engines/Transmissions   Posted: Mon Nov 28, 2011 7:02 am   Subject: 78 mm crank build
Thanks for the cam ideas. I'm still working on understanding what the specs mean, duration and lift. Please let me know why a cam would be a good choice in my build.

Thanks for the tips on oiling ...
  Topic: 78 mm crank build
mike karp

Replies: 12
Views: 1912

PostForum: Performance/Engines/Transmissions   Posted: Sun Nov 27, 2011 8:47 am   Subject: 78 mm crank build
I have been doing lots of reading and I am at the stage where I better ask some questions, and get suggeations. I want to build a motor based off what I have:

AS 21 fi case that still needs machine ...
 
Page 1 of 1
All times are Mountain Standard Time/Pacific Daylight Savings Time
Jump to:  

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2020, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB