Author |
Message |
sioux888 Samba Member
Joined: November 12, 2015 Posts: 98 Location: La Feria Texas
|
Posted: Wed Oct 05, 2022 8:32 am Post subject: Rotisserie Question |
|
|
Hi guys.
I am planning to make a rotisserie for my early bay bus but I have not enough room in my garage, so looking at all the different types, I've noticed that the roll on / hoop type would fit my needs however; I have not found any photos or projects of those hoop like rotisseries on baywindow buses, but only on split windows
A guy on facebook mentioned that there's absolutely no differences other than the size and location of holes for the holding brackets.
Does some knows if hoop type rotisseries are feasible in a baywindow bus??? |
|
Back to top |
|
|
VWsArent4Hippies Samba Member
Joined: April 13, 2005 Posts: 3079 Location: The Bull City
|
Posted: Wed Oct 05, 2022 8:49 am Post subject: Re: Rotisserie Question |
|
|
Yes, will function the same. You just need to make sure your bolt patterns are correct for the mounting points. Mine bolts to the beam holes and rear torsion tube end cap holes.
This thread in the split bus forum should get you there.
https://www.thesamba.com/vw/forum/viewtopic.php?t=175412&highlight=rotisserie _________________
aeromech wrote: |
in my opinion you don't know shit |
|
|
Back to top |
|
|
babysnakes Samba Member
Joined: August 19, 2008 Posts: 7107
|
Posted: Wed Oct 05, 2022 12:38 pm Post subject: Re: Rotisserie Question |
|
|
My single cab, |
|
Back to top |
|
|
SGKent Samba Member
Joined: October 30, 2007 Posts: 41031 Location: Citrus Heights CA (Near Sacramento)
|
Posted: Wed Oct 05, 2022 1:29 pm Post subject: Re: Rotisserie Question |
|
|
so that is how you get water out of their ears. _________________ “Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin |
|
Back to top |
|
|
SGKent Samba Member
Joined: October 30, 2007 Posts: 41031 Location: Citrus Heights CA (Near Sacramento)
|
Posted: Wed Oct 05, 2022 1:29 pm Post subject: Re: Rotisserie Question |
|
|
duplicate _________________ “Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin
Last edited by SGKent on Fri Oct 07, 2022 8:30 am; edited 1 time in total |
|
Back to top |
|
|
sioux888 Samba Member
Joined: November 12, 2015 Posts: 98 Location: La Feria Texas
|
Posted: Fri Oct 07, 2022 3:38 am Post subject: Re: Rotisserie Question |
|
|
babysnakes wrote: |
My single cab, |
That is awesome man!!
I'll definitely look carefully at your photos to get some ideas on how to build mine
Thanks a lot for sharing |
|
Back to top |
|
|
Vangabonders Samba Member
Joined: January 15, 2013 Posts: 174 Location: Chattanooga TN
|
|
Back to top |
|
|
Trevo1 Samba Member
Joined: July 09, 2023 Posts: 1 Location: Belfast
|
Posted: Wed Jul 12, 2023 9:21 am Post subject: Rotisserie Question |
|
|
Has anybody got the revised CAD plans for a T2 Bay Window? I am aware this is designed for the T1 Kombi but there are some differences in the sizes etc.
|
|
Back to top |
|
|
|