SKULLDUGGERY

[TDCTDI]

After drilling out the rest of the holes, I slid the seat track into a seat to ensure correct alignment of the tracks.

I then set the assembly onto the pan & positioned it back up to the lines.

And tacked it in place.

Once secured, I removed the seat, flipped the pan over & began filling in the holes.

_________________
Everybody born before 1975 has a story, good, bad, or indifferent, about a VW.


GOFUNDYOURSELF, quit asking everyone to do it for you!


An air cooled VW will make you a hoarder.


Do something, anything, to your project every day, and you will eventually complete it.

[TDCTDI]

This morning I plugged up the rest of the holes.

And started knocking down the high spots.

And then buffed them off with a Scotch Brite surface pad.

_________________
Everybody born before 1975 has a story, good, bad, or indifferent, about a VW.


GOFUNDYOURSELF, quit asking everyone to do it for you!


An air cooled VW will make you a hoarder.


Do something, anything, to your project every day, and you will eventually complete it.

[TDCTDI]

Today’s endeavors consisted of knocking down the rest of the welds with a cutoff wheel.

Grind them flush with a sanding disc.

And finish them off with a scotchbrite pad.

_________________
Everybody born before 1975 has a story, good, bad, or indifferent, about a VW.


GOFUNDYOURSELF, quit asking everyone to do it for you!


An air cooled VW will make you a hoarder.


Do something, anything, to your project every day, and you will eventually complete it.

[madster]

_________________
1966 BEETLE @ 1973 THING