So it begins

Axel Breaker Earl · Posted: Tue Nov 19, 2024 7:49 pm Post subject: Re: So it begins

Dammit man!! I sure hope the prognosis is good news......hang in there and make sure to take care of yourself first! Keep us posted on your health, and we will pray for some good news!

bruceo98 · Posted: Tue Nov 19, 2024 9:16 pm Post subject: Re: So it begins

Thanks.
Hopefully I can get past all this by the holidays and get back to normal. I’ve got a car to finish . lol
_________________
I may not be the best, but when the top 10 get together, they all talk about me.

DUNGBTL · Posted: Wed Nov 20, 2024 7:41 am Post subject: Re: So it begins

Wishing you the best…take care.

J.

bruceo98 · Posted: Wed Nov 20, 2024 12:40 pm Post subject: Re: So it begins

Got the finger today. doc said it felt fine. Wants me to get a MRI to check to make sure,.Then go from there if he needs to do a biopsy.
_________________
I may not be the best, but when the top 10 get together, they all talk about me.

bruceo98 · Posted: Fri Nov 22, 2024 11:55 am Post subject: Re: So it begins

Took the body back off so it would make it easier to run all the intercooler piping .
I won’t need it anymore on the chassis so now we can start prepping the car for paint while I work on the chassis and motor stuff

Image may have been reduced in size. Click image to view fullscreen.

_________________
I may not be the best, but when the top 10 get together, they all talk about me.

kpf · Posted: Fri Nov 22, 2024 12:51 pm Post subject: Re: So it begins

bruceo98 · Posted: Fri Nov 22, 2024 4:18 pm Post subject: Re: So it begins

Thanks ,
Got some of the hose runs done and the fill tank. Made a bracket for the fill tank but still have to powder coat it. everything is in mock up stage.

_________________
I may not be the best, but when the top 10 get together, they all talk about me.

DUNGBTL · Posted: Fri Nov 22, 2024 8:46 pm Post subject: Re: So it begins

bruceo98 · Posted: Fri Nov 22, 2024 10:57 pm Post subject: Re: So it begins

Thanks .
Yep same one . I just had AN bungs welded on. Thanks for the idea and link in your build .
I was able to figure out what silicone hoses I needed for the intake stuff and have them ordered.
Was hoping to be able to get some work done on it again tomorrow but we’ll have to see.
_________________
I may not be the best, but when the top 10 get together, they all talk about me.

bruceo98 · Posted: Sat Nov 23, 2024 8:42 am Post subject: Re: So it begins

Double checking the fit. On the filler i could move it down or i can cut out above it to be able to fill it. ac fitted and good to go.

_________________
I may not be the best, but when the top 10 get together, they all talk about me.

bruceo98 · Posted: Sat Nov 23, 2024 11:03 am Post subject: Re: So it begins

Problem solved.Well ,not really a problem, just another thing to do when you put a Frankenstein car together.

_________________
I may not be the best, but when the top 10 get together, they all talk about me.

DUNGBTL · Posted: Sat Nov 23, 2024 2:03 pm Post subject: Re: So it begins

bruceo98 · Posted: Sat Nov 23, 2024 7:25 pm Post subject: Re: So it begins

Also started on putting the lower door patch panels on today . Need a new whip for the mig welder and I’m getting one Monday so I can start welding them up . Pretty happy with the way they are turning out for as bad as they were . I put new inner and outer lower panels on both doors .

_________________
I may not be the best, but when the top 10 get together, they all talk about me.

bruceo98 · Posted: Sun Nov 24, 2024 9:28 am Post subject: Re: So it begins

DUNGBTL · Posted: Sun Nov 24, 2024 11:21 am Post subject: Re: So it begins

bruceo98 · Posted: Sun Nov 24, 2024 12:08 pm Post subject: Re: So it begins

I hear you . I try to order parts I need ahead of time but it doesn’t always work out that way. I’m waiting on a few things to come in but meanwhile I’m working on other things.
_________________
I may not be the best, but when the top 10 get together, they all talk about me.

bruceo98 · Posted: Tue Nov 26, 2024 9:11 pm Post subject: Re: So it begins

No work done on it today. Short week and short on help , so I had to do more than usual around the shop . No time for the bug . I did get the parts I ordered in . All the intake turbo piping and silicone hoses and clamps . Might have time Saturday to get that together.
_________________
I may not be the best, but when the top 10 get together, they all talk about me.

bruceo98 · Posted: Wed Nov 27, 2024 4:11 pm Post subject: Re: So it begins

One silicone cut and fitted. not a lot of time to spend on it today.

_________________
I may not be the best, but when the top 10 get together, they all talk about me.

bruceo98 · Posted: Wed Dec 04, 2024 6:43 pm Post subject: Re: So it begins

Finished up running the intercooler piping today . Now to take it apart to polish up the intercooler and brackets

_________________
I may not be the best, but when the top 10 get together, they all talk about me.

bruceo98 · Posted: Fri Dec 06, 2024 5:01 pm Post subject: Re: So it begins

Started laying out the wiring harness today . Oh this is going to be fun. Some have to be extended and others shortened . Some have to be eliminated Even though I’ve already pulled some when I took it out of the Wrx .What a clusterfuck. Did I say I hate wiring? Thank God my son loves this stuff and is very knowledgeable about wiring and electronics.
_________________
I may not be the best, but when the top 10 get together, they all talk about me.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

So it begins
Page: Previous 1, 2, 3 ... 27, 28, 29, 30 Next Jump to:

Forum Index -> Beetle - Late Model/Super - 1968-up		Share:
		Print View

	Forum Index -> Beetle - Late Model/Super - 1968-up	All times are Mountain Standard Time/Pacific Daylight Savings Time Page: Previous 1, 2, 3 ... 27, 28, 29, 30 Next Jump to:
Page 28 of 30