Lug bolt pattern. 4x114.3

[68 Patina Type3]

1968 Type3 squareback with custom wheels bolt pattern 4x114.3,
I had to buy a new rear brake rotor and I found out how difficult it's to buy it with 4x114.3 pattern. I bought a rear blank rotor and did it myself and help of my brother. If Anyone need help make a template with any bolt pattern measurements, I can explain how I we did it.

[NJ John]

Did you take pictures? If so you can upload them to the gallery. And post them in their thread. Would love to see what wheels your using.
_________________
1973 standard, yellow, lowered, 3” narrowed front, 1600 blo-thru turbo w/single dell 15.4@86, so far
11.41 et buggy. Long gone
Let’s go O’s! Let’s go O’s!
https://www.youtube.com/@AirSpooledGarage

[68 Patina Type3]

[img]https://www.thesamba.com/vw/gallery/pix/2553967.jpg

[/img]





I had to make a 4x114.3 and pictures of the process, I did all measurements on computer then I made a template with the hole of the spline in the center the I drilled the rotor. Pictures may not in order

[banana split]

Nice looking wheels. Good job!
_________________
My Beetles :
1951 Crotch Cooler 11G Split Ragtop
1953 Zwitter
1964 Chop Top

[NJ John]

Looks good.
_________________
1973 standard, yellow, lowered, 3” narrowed front, 1600 blo-thru turbo w/single dell 15.4@86, so far
11.41 et buggy. Long gone
Let’s go O’s! Let’s go O’s!
https://www.youtube.com/@AirSpooledGarage

[Mike Fisher]

I paid a machinist to drill 130 on my 114.3 Zenith knockoff wire wheel hubs.
I didn't even consider drilling them myself!

_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey

[68 Patina Type3]

I can help anyone that need help figure out the measurement for any bolt pattern