| Author |
Message |
VWNYCMike
Samba Member
Joined: March 30, 2022
Posts: 57
Location: NYC USA
|
 Posted: Fri Dec 13, 2024 3:49 pm Post subject: KDF Speedo Reproduction Gauge Decal |
 |
|
Hello,
I am looking to purchase a reproduction KDF speedo gauge decal. I know the Sam Steel has them on his website but unfortunately, I have had no luck contacting him since the end of October 2024. I am assuming that are two parts; the upper VW cog logo and the speedo dial itself. Open to all suggestions!
Thanks in advance,
Mike
|
|
| Back to top |
|
 |
johnshenry
Samba Member
Joined: September 21, 2001
Posts: 9401
Location: Northwood, NH USA
|
| Posted: Fri Dec 13, 2024 7:11 pm Post subject: Re: KDF Speedo Reproduction Gauge Decal |
|
|
Yes, they are two different decals. I may have them, I will look next time in the shop. On these speedos they work well as the face is perfectly flat. On the later brown ones, sticker/decals were made, but they have a circumferential "Dish" to them and the stickers would lift after a while.
_________________
John Henry
'57 Deluxe
'56 Single Cab |
|
| Back to top |
|
|
VWNYCMike
Samba Member
Joined: March 30, 2022
Posts: 57
Location: NYC USA
|
| Posted: Fri Dec 13, 2024 9:12 pm Post subject: Re: KDF Speedo Reproduction Gauge Decal |
|
|
| johnshenry wrote: |
| Yes, they are two different decals. I may have them, I will look next time in the shop. On these speedos they work well as the face is perfectly flat. On the later brown ones, sticker/decals were made, but they have a circumferential "Dish" to them and the stickers would lift after a while. |
Thank you sir !
All the best,
Mike |
|
| Back to top |
|
|
VWNYCMike
Samba Member
Joined: March 30, 2022
Posts: 57
Location: NYC USA
|
| Posted: Tue Dec 17, 2024 8:54 am Post subject: Re: KDF Speedo Reproduction Gauge Decal |
|
|
| johnshenry wrote: |
| Yes, they are two different decals. I may have them, I will look next time in the shop. On these speedos they work well as the face is perfectly flat. On the later brown ones, sticker/decals were made, but they have a circumferential "Dish" to them and the stickers would lift after a while. |
Good morning,
Just wondering if you had any luck finding those two decals.
Many thanks,
Mike |
|
| Back to top |
|
|
|
