notching help

[kbwakesk8]

before the crash i had started a post asking questions about notchers and some of you posted some cool links to site that calculated cuts and one that you could print paterns out with. im looking for those links.
thanks for all the help.

[Nicksan]

Tubing notchers? Was it one of these, low buck, van sant or, Pro Tools?

http://www.pro-tools.com/

http://www.vansantent.com/tube_coping_machines.htm

http://www.lowbucktools.com/

[Adrenaline Junky]

This what your looking for?

http://midmoracing.com/bendit.htm

OR

http://www.vansantent.com/pipeMaster.htm

OR

Actually, I think this is what you want

http://www.ozhpv.org.au/shed/tubemiter.htm

Good luck

[kbwakesk8]

the link im looking for is one where you type in th size of the tube and wall thickness and at what angle the tubes come to geter and you can then print the partern and cut it out and trace it on your tube. it was really cool.

[kbwakesk8]

my bad its http://www.ozhpv.org.au/shed/tubemiter.htm

thanks