rizzag - [email protected]

[computerguyrocks]

2rd set of spindles from Rizzag. Fast turn around and they look brand new. Welding is so nice almost to nice to put back on....maybe I will leave them next to the pc to look at them for a while
Jeff You Da Man !!

You can't get a better job anywhere... !!!!!!!


_________________
Working on car 56, looking for my next cool show car. Hint would trade my Rad Vert for a bus...

[the bus driver]

I first did some research about spindles, then i saw the feedback of 'rizzag spindles', and now a couple of weeks later they arrived !!

they look very very good, i must say it's a pleasure doing business with you jeff!

even got an instruction paper with it..

i recommend this man to every one who's looking for spindles and a great service!!!


greetings from Belgium (Europe)

Stephan

[OG Velvet]

Here are my nasty ass spindles before. Jeff said they were the worst he's ever seen. Needle bearings? What the hell are those? Mine were powder.

Here is the after shot. All beautifully rebuilt with good kingpins and link pins, cleaned up and painted.

I would be driving right now, except I didn't get the WW reamer in the mail yesterday, so I have to wait to do my center pin. This should make a HUGE difference it what once was seriously scary steering.

Thanks Jeff!!
_________________
'67 13 Window
'77 Westy
'69 Sunroof Beetle
'65 Honda Dream

[Busamov]

[Yustrn]

After getting my spindles from Jeff months ago finally got time to get the whole beam done, had a few questions Jeff answered without problem, even needed some extra odds and ends that he sent priority out of his own stash just to help me out.

If you need spindles this is the guy to go to without question the money is well spent!
_________________
I own a copy of "The Car of the Century" by Garwood. This means I am authorized to act like a twat in thesamba forums.

[sinclair]

What's his spec on dropped spindles re welding etc?

[rizzag]

[ratlookvw]

get all my spindes from Rizzag! best spindle deal on thesamba.com thanks jeff!
_________________
If the RV Hut is a rockin, don't come a knockn'
57 Panel, 66 highroof panel, 65 Notch, 59 Vert, 61 Vert, 1969 Fridolin, 'Reggie ' 66 RV, 65 Pipe Truck, 65 RHD T-34, 70 dbl slider panel, 1969 Deep sea green sunroof automatic square, the greypoop-on, and a shit load of wheels!

[61Panelwagen]

[rizzag]

I am working a new job now that I graduated with my Bachelors. So now I am only doing them on the weekends. Usually I can do them the weekend following when I receive them and have them back in the mail the following Monday.

Jeff
_________________
flossin, tossin, dippin, and trippin

[inkstain]

another beautiful masterpiece. received my spindles in record time. had a few installation questions and received very quick responses and lots of help. thanks jeff.


shawn price:

[Touch Nicks Thing]

Recently bought a set of dropped spindles from Jeff, they look badass and should do the job. They were packaged awesome and got here from Oregon in like 5 days.

Also, bought a used set of Linkpins. They were packed nice and exactly as described.

Thanks Rizzag

[wayne martin]

I just got mine. As i live in the UK I thought they would take a while to come but within a week they were here and Iam very pleased. excellent quality and show condition! their the best Ive seen and cheaper than any others over here and better quality! Top man he is!

[61Panelwagen]

Fast turn around and beautiful work.Pictures speak for themselves.

Before:

After:

Thanks Jeff

[campingbox]

I haz Rizzag rebuild some barndoor spindles and they turned out great. He only had them for three days and that included turning down the kingpins. Recommended!

[mactraveler]

Just had my spindles done by jeff and I am very impressed. He is very good about keeping you in the loop and letting you know what is going on. Very quick turnaround time and the product is 110%. If I ever had to get dropped spindles again I would not hesitate to send them to Jeff.
Thanks again Jeff.

[dstefun]

Jeff does stock spindles too and I'm just as happy as the dropped guys. Super quick service and wow do they look great! I know my SC will be happy. Thanks Jeff!

[Rob R]

Jeff rebuilt my stock 63 spindles, replaced two link pins and bushings and found a good roller bearing. They should be good for another 45 years. They look great. Thanks Jeff

[mactraveler]

This is my second set of spindles from Jeff. Once again the service and quality were awesome! Thanks again Jeff.
_________________
64 Kombi
66 Standard
69 Campmobile

[WYMER1]

WOW ! what a nice deal ! thanks Mark