Author |
Message |
westy81 Samba Member
Joined: July 07, 2007 Posts: 141 Location: Irvine, California
|
Posted: Mon Feb 25, 2008 3:46 pm Post subject: |
|
|
Hey folks - unfortunately it looks like I may need to abandon my Vanagon SVX project.
To the horror of SVX nerds in my area, the engine was carefully pulled from a beautifully running SVX with a motor that - according to Leon Korkin - "sounded as quiet as a sewing machine". The engine and all components were carefully and slowly pulled, meticulously labeled and stored indoors. I pulled and saved the entire HVAC system, have the original exhaust with catalytic converters (for Californian referee purposes), etc. This is a very well-thought-out engine pull done specifically for a Vanagon conversion - not just a grab/slash job like at your local junkyard.
http://flickr.com/photos/youraccount/sets/72157601996325738/
Considering offers over $1500. Must be picked up at 92617. Will sell with engine hoist, engine stand and Snap-On floor jack (at an extra charge).
Thanks,
Garnet
949-854-4476
Last edited by westy81 on Tue Feb 26, 2008 8:57 am; edited 1 time in total |
|
Back to top |
|
|
pete000 Samba Member
Joined: July 29, 2004 Posts: 642 Location: Ocala FL
|
Posted: Mon Feb 25, 2008 8:57 pm Post subject: |
|
|
Why are you jumping ship ? I wanted to follow in your foot steps ! _________________ 1990 Vanagon RS 2.1
1967 Deluxe 21 window
--------------------
Koni Shocks
H & R Red Springs
Addco Sway Bars Front-Rear
18 X 7.5 and 18 X 8 OEM Porsche Wheels
Recaro Power-Heated seats |
|
Back to top |
|
|
westy81 Samba Member
Joined: July 07, 2007 Posts: 141 Location: Irvine, California
|
Posted: Mon Feb 25, 2008 10:11 pm Post subject: |
|
|
Need the cash and need to finish my PhD. Interested in the goodies? |
|
Back to top |
|
|
Tristar Eric Samba Member
Joined: July 25, 2004 Posts: 1242 Location: Portland, Or
|
Posted: Tue Feb 26, 2008 10:14 pm Post subject: |
|
|
Does it come with harness and ECU? obdI or obdII? _________________ Vanagon/Transporter flares here: www.terrawagen.com
[email protected] |
|
Back to top |
|
|
goffoz Samba Member
Joined: May 09, 2007 Posts: 1486
|
Posted: Tue Feb 26, 2008 11:05 pm Post subject: |
|
|
Bummmer!
You were my inspiration, to get out there and finish mine....hrummmph!
|
|
Back to top |
|
|
pete000 Samba Member
Joined: July 29, 2004 Posts: 642 Location: Ocala FL
|
Posted: Tue Feb 26, 2008 11:07 pm Post subject: |
|
|
I am some what interested but need to talk to Joe at Euro pro on whats involved in making it CA legal conversion. He has one.
Do you have any of the conversion parts such as mounts, adapters, harness, ECU, exhaust etc...
Eric, are you interested ? Thought you were a WRX guy. _________________ 1990 Vanagon RS 2.1
1967 Deluxe 21 window
--------------------
Koni Shocks
H & R Red Springs
Addco Sway Bars Front-Rear
18 X 7.5 and 18 X 8 OEM Porsche Wheels
Recaro Power-Heated seats |
|
Back to top |
|
|
goffoz Samba Member
Joined: May 09, 2007 Posts: 1486
|
Posted: Tue Feb 26, 2008 11:18 pm Post subject: |
|
|
86 Bundeswehr Syncro.....svx
....thats what I'm going for! |
|
Back to top |
|
|
Tristar Eric Samba Member
Joined: July 25, 2004 Posts: 1242 Location: Portland, Or
|
Posted: Wed Feb 27, 2008 12:12 am Post subject: |
|
|
I wanted to swap that JDM WRX out of the 85 Doka. I've been wanting to try an SVX for a while now. Just need to find the right one.
I'm seeing more and more cheap SVX'x come up, but they all have super high miles. _________________ Vanagon/Transporter flares here: www.terrawagen.com
[email protected] |
|
Back to top |
|
|
westy81 Samba Member
Joined: July 07, 2007 Posts: 141 Location: Irvine, California
|
Posted: Wed Feb 27, 2008 9:27 am Post subject: |
|
|
pete000 wrote: |
I am some what interested but need to talk to Joe at Euro pro on whats involved in making it CA legal conversion. He has one.
Do you have any of the conversion parts such as mounts, adapters, harness, ECU, exhaust etc...
Eric, are you interested ? Thought you were a WRX guy. |
This motor was pulled with the specific intent to pass Californian DMV referee. I don't have conversion parts, but can hook you up with the parts supplier I was going to use. He supplies Californian conversion shops, and his work is excellent and prices are a lot better than Joe or Mastercraft, etc.
I have all the stock items you might need for a difficult CA legal conversion: stock exhaust, charcoal canister, etc, etc, etc |
|
Back to top |
|
|
westy81 Samba Member
Joined: July 07, 2007 Posts: 141 Location: Irvine, California
|
Posted: Tue Mar 25, 2008 6:43 pm Post subject: |
|
|
The engine was sold to some dude in San Diego that is putting it into a Wolfsburg... basically this same project with a different owner. He's supposedly going to give me a call when it's done so I can go down and take 'er for a spin... and weep. The project is now officially dead. Boo hoo.
I will return to this project when I'm done my PhD and have a real job. |
|
Back to top |
|
|
|