Author |
Message |
Haupt Strasse Motors Samba Member
Joined: July 07, 2005 Posts: 15 Location: Harriman, MY
|
Posted: Thu Feb 28, 2008 9:47 am Post subject: thing floor pan floor matt holding pins |
|
|
Does any one know how many of the floor pan / matt clips there are
and know where they go? The thing shop sold me 6 per side but, they
don't know where they go. does any have a nice interior picture of a nice
original floor pan?
Thanks , Bill |
|
Back to top |
|
|
kubelmann Samba Member
Joined: April 13, 2003 Posts: 3266
|
Posted: Thu Feb 28, 2008 11:02 pm Post subject: |
|
|
There are dimples on the pan that locate the pins. |
|
Back to top |
|
|
Haupt Strasse Motors Samba Member
Joined: July 07, 2005 Posts: 15 Location: Harriman, MY
|
Posted: Sun Mar 02, 2008 5:56 pm Post subject: Thing floor pan |
|
|
Thanks for your reply,
I already know about the 3 dimples in front and 2 in rear per side, thats
10, the thing shop said I needed 12 and sold me a set, I guess I have 2 extra.
Bill |
|
Back to top |
|
|
kubelmann Samba Member
Joined: April 13, 2003 Posts: 3266
|
Posted: Sun Mar 02, 2008 6:08 pm Post subject: |
|
|
4 for the front mat and two for the rear mat = 6 X two sides = 12 pins |
|
Back to top |
|
|
Haupt Strasse Motors Samba Member
Joined: July 07, 2005 Posts: 15 Location: Harriman, MY
|
Posted: Mon Mar 03, 2008 3:15 pm Post subject: Thing floor pan loor matt pins |
|
|
Thanks again,
I guess my pans did not come with enough dimples in the front half
so I can only find 5 per side and don't know where the 6th goes.
I need a picture, I was even looking at pictures of cars forsale
to see if I could find a clear shot. no luck.
Bill |
|
Back to top |
|
|
rene p. l. Samba Member
Joined: September 27, 2002 Posts: 280 Location: YQB, Québec, Canada
|
Posted: Mon Mar 03, 2008 6:16 pm Post subject: |
|
|
Just took these for you...
If you need more, let me know...
Front driver side
Rear driver side
Front passenger side
This one doesn't look to be at the same place than the driver side one.
|
|
Back to top |
|
|
Haupt Strasse Motors Samba Member
Joined: July 07, 2005 Posts: 15 Location: Harriman, MY
|
Posted: Tue Mar 04, 2008 6:06 am Post subject: thing floor pan floor matt holding pins |
|
|
Hi,
Thanks for your excellent pictures, it clearly shows the ones I could not find.
Bill |
|
Back to top |
|
|
kubelmann Samba Member
Joined: April 13, 2003 Posts: 3266
|
Posted: Tue Mar 04, 2008 6:09 am Post subject: |
|
|
Yes these are such good pics they are now included in the RoMTOC Thing data CD. Great resource for Thing owners. |
|
Back to top |
|
|
rene p. l. Samba Member
Joined: September 27, 2002 Posts: 280 Location: YQB, Québec, Canada
|
Posted: Tue Mar 04, 2008 10:18 am Post subject: |
|
|
kubelmann wrote: |
Yes these are such good pics they are now included in the RoMTOC Thing data CD. Great resource for Thing owners. |
I cut my rockers to do that kind of pics!!!
I will send you more photos with clean floor once my resto will be completed. |
|
Back to top |
|
|
|