| Author |
Message |
Dougy Dee
Samba Member
Joined: August 21, 2004
Posts: 1668
Location: Niagara Region, CANADA
|
 Posted: Sat Jan 24, 2009 2:57 pm Post subject: 3/4 Race Cam? |
 |
|
I split a 40HP case today and found a windage try and cam with either 314 or 3/4 stamped on the end. .275 lift. (Steep ramps with round nose) Cam blank is a 113 with a 113 gear.
Did vintage VW cam grinders use the 3/4 designation or were stock 40HP stamped this way? |
|
| Back to top |
|
 |
volksworker
Samba Member
Joined: October 30, 2004
Posts: 309
Location: Arizona
|
| Posted: Sun Jan 25, 2009 1:11 pm Post subject: |
|
|
Yes the Weber Tool company made a "3/4" race cam and a full circle crank for 36 and 40 hp motors back in the 50s and 60s.............I think Isky also grouped his early VW cams that way then went to his own part numbers like 2b and 2j
_________________
Tom
67 Porsche 912 Bahama Yellow
68 Crew Cab Transporter
73 Thing original
57 MGA 1500 Coupe
71 K20 Suburban 3dr |
|
| Back to top |
|
|
|
