Author |
Message |
hansie Samba Member
Joined: August 29, 2007 Posts: 476 Location: Beach Lake, PA
|
Posted: Tue Aug 25, 2009 5:34 pm Post subject: Oil coming out of overflow tube on fuel pump |
|
|
I have oil coming out of the over flow hose on my 1800 fuel pump. I am not useing the pump ,I have an electrial pump hooked up. A friend said just to leave the old pump hang there. We took it out for a run the other night and I didn't think I was going to make it back home. It is a used motor in the bus,it has a weber carb on it. I thought the carb needs to be rebuilt. Put the bus back in the garage . Went down tonight to pull the carb and there was about 2 quarts of oil on the floor. Can any one help.
Thanks Karl _________________ Karl Bower |
|
Back to top |
|
|
busdaddy Samba Member
Joined: February 12, 2004 Posts: 51153 Location: Surrey B.C. Canada, but thinking of Ukraine
|
|
Back to top |
|
|
hansie Samba Member
Joined: August 29, 2007 Posts: 476 Location: Beach Lake, PA
|
Posted: Tue Aug 25, 2009 6:08 pm Post subject: |
|
|
Thanks Busdaddy
I read two of the posts there. I hope I am right !! I guess I have a bad diaphagm in my fuel pump ,that is why I am loseing oil like I am. I guess I can take off the fuel and pull the rod and put on a cover plate and run like that -right ?
Thanks for any help !!
Karl _________________ Karl Bower |
|
Back to top |
|
|
busdaddy Samba Member
Joined: February 12, 2004 Posts: 51153 Location: Surrey B.C. Canada, but thinking of Ukraine
|
Posted: Tue Aug 25, 2009 7:02 pm Post subject: |
|
|
If you don't have an oil pressure gauge you may want to choose the shortened rod option, without a way to tell you'll never know the pressure has dropped until it's too late. _________________ Rust NEVER sleeps and stock never goes out of style.
Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!
Слава Україні! |
|
Back to top |
|
|
hansie Samba Member
Joined: August 29, 2007 Posts: 476 Location: Beach Lake, PA
|
Posted: Fri Aug 28, 2009 12:54 pm Post subject: |
|
|
Well I guess I will shorten the rod,and make a cover plate. My big question now is why did my oil drain out of the little hose. I mean it draned all of it , with the motor shut off .
Karl _________________ Karl Bower |
|
Back to top |
|
|
|