Author |
Message |
Thornton EMPI Guru
Joined: August 27, 2001 Posts: 2107 Location: Portland to AZ back to Portland
|
Posted: Tue Dec 01, 2009 9:03 am Post subject: |
|
|
what tires are these cars running on these wheels?
205/40/17's? _________________ Thornton |
|
Back to top |
|
|
Iozzio Samba Member
Joined: March 10, 2005 Posts: 354 Location: Molalla Oregon
|
Posted: Tue Dec 01, 2009 10:15 pm Post subject: |
|
|
yes _________________ Paul Iozzio
www.iozziowheels.com |
|
Back to top |
|
|
WVbugman Samba Member
Joined: February 03, 2005 Posts: 68 Location: Petersburg, WV
|
Posted: Wed Dec 02, 2009 8:48 am Post subject: New "early style" 17" Forged Fuchs-style prot |
|
|
How do think 195/45r17 tires would work? They are .25" more narrow and .4 " taller than 205/40r17's. I could use the extra height to avoid bottoming out and the taller sidewall should ride better. I am worried the extra height may cause rubbing issues but being more narrow could help to offset any rubbing. |
|
Back to top |
|
|
Iozzio Samba Member
Joined: March 10, 2005 Posts: 354 Location: Molalla Oregon
|
Posted: Wed Dec 02, 2009 10:39 pm Post subject: |
|
|
I need more info, what model vw, year, suspension setup, etc. Thanks _________________ Paul Iozzio
www.iozziowheels.com |
|
Back to top |
|
|
71-BEETLE-SEDAN Samba Member
Joined: January 22, 2009 Posts: 195
|
Posted: Thu Dec 03, 2009 3:16 am Post subject: |
|
|
Okay they olok sick as.
Is anyone in australia selling them?
And would they fit a 71 beetle with discs up front and drums up back. No widened fenders and no narrowed beam?
Chers Josh |
|
Back to top |
|
|
Airkewld Samba Member
Joined: November 14, 2003 Posts: 3150 Location: Goodyear, AZ USA
|
|
Back to top |
|
|
71-BEETLE-SEDAN Samba Member
Joined: January 22, 2009 Posts: 195
|
Posted: Thu Dec 03, 2009 3:31 pm Post subject: |
|
|
okay, how much i spostage to the east coast of aus roughly. |
|
Back to top |
|
|
vweddie Samba Member
Joined: September 22, 2005 Posts: 172 Location: Ky....via El Monte, Ca.
|
Posted: Sun Dec 06, 2009 8:02 pm Post subject: |
|
|
scottz wrote: |
66fasty wrote: |
Is that Ghia on an IRS pan?Doesn't look to have much camber. I'm interested in a set for my 64 ghia on a 74 IRS pan. |
I would also like to know the specs on that Ghia if you have them.
Narrowed beam, how much? Short axels, adapters, etc...
Thanks!
|
I'd also like to know the info. on this set up. _________________ T.B.D.
79 El Camino
12 Scion Tc |
|
Back to top |
|
|
kostya.lyt Samba Member
Joined: December 20, 2007 Posts: 71 Location: Pearland, TX
|
Posted: Thu Dec 10, 2009 9:38 pm Post subject: |
|
|
Hmm, I wonder what these would look like on a Split Window Bus. |
|
Back to top |
|
|
Iozzio Samba Member
Joined: March 10, 2005 Posts: 354 Location: Molalla Oregon
|
Posted: Thu Dec 17, 2009 10:47 pm Post subject: |
|
|
With the right suspension they should look killer. _________________ Paul Iozzio
www.iozziowheels.com |
|
Back to top |
|
|
63 rag and a 914 Samba Member
Joined: January 16, 2009 Posts: 13 Location: Penn Valley
|
Posted: Mon Dec 21, 2009 1:05 pm Post subject: |
|
|
It sucks that I am just a broke college student. If I could I would order two sets one set foe the 63 bug and one set for the 914. For now I will be rockin 15 inch fuchs! |
|
Back to top |
|
|
Iozzio Samba Member
Joined: March 10, 2005 Posts: 354 Location: Molalla Oregon
|
Posted: Tue Dec 22, 2009 9:45 pm Post subject: |
|
|
Save your pennies, maybe ask Santa for a set! _________________ Paul Iozzio
www.iozziowheels.com |
|
Back to top |
|
|
Beetspeed Samba Member
Joined: July 30, 2004 Posts: 429 Location: The Netherlands
|
Posted: Sat Jan 02, 2010 3:46 am Post subject: |
|
|
What are the final weights of the 3 wheel width sizes?
Tnx,
Walter _________________ '75 SB 1303 2,4ltr T4 turbo: 10.58 @ 129.9mph
'65 Ruska buggy 1192cc EFI 80hp N/A |
|
Back to top |
|
|
Crankey Samba Member
Joined: July 11, 2004 Posts: 2656
|
Posted: Sat Jan 02, 2010 9:37 pm Post subject: |
|
|
any chance of a 5x112 bolt pattern ? for vanagon ?
what's the ET on them...best go back through the thread
nice work they look sweet. |
|
Back to top |
|
|
Iozzio Samba Member
Joined: March 10, 2005 Posts: 354 Location: Molalla Oregon
|
Posted: Sun Jan 03, 2010 12:45 pm Post subject: |
|
|
Beetspeed wrote: |
What are the final weights of the 3 wheel width sizes?
Tnx,
Walter |
I know for sure that the 17X7 comes in at 20.5lbs so the 8 will not be much more. _________________ Paul Iozzio
www.iozziowheels.com |
|
Back to top |
|
|
Iozzio Samba Member
Joined: March 10, 2005 Posts: 354 Location: Molalla Oregon
|
Posted: Sun Jan 03, 2010 12:47 pm Post subject: |
|
|
[quote="Crankey"]any chance of a 5x112 bolt pattern ? for vanagon ?
what's the ET on them...best go back through the thread
nice work they look sweet.[/quote
I believe the smallest I can do is 5X114, I can check. The ET is adjustable from 12mm to 80mm on these wheels.
So I found out that a 5X112 pattern is available. _________________ Paul Iozzio
www.iozziowheels.com |
|
Back to top |
|
|
Iozzio Samba Member
Joined: March 10, 2005 Posts: 354 Location: Molalla Oregon
|
Posted: Sun Jan 24, 2010 2:07 am Post subject: |
|
|
Petes bug with my detailed 17's
_________________ Paul Iozzio
www.iozziowheels.com |
|
Back to top |
|
|
Iozzio Samba Member
Joined: March 10, 2005 Posts: 354 Location: Molalla Oregon
|
Posted: Sun Jan 24, 2010 2:09 am Post subject: |
|
|
Blakes bug with a set of polished 17's
_________________ Paul Iozzio
www.iozziowheels.com |
|
Back to top |
|
|
buggyboyshane Samba Member
Joined: December 08, 2004 Posts: 72 Location: newcastle northern ireland/ Valley Springs California
|
Posted: Wed Feb 03, 2010 11:40 am Post subject: |
|
|
Iozzio wrote: |
Petes bug with my detailed 17's
|
hi buddy, would love a set of these wheels and just want to check set up.
the picture above- could you tell me wheel specifics and suspension specifics- eg, et, narrowed, wider wings etc etc
cheers
shane |
|
Back to top |
|
|
Iozzio Samba Member
Joined: March 10, 2005 Posts: 354 Location: Molalla Oregon
|
|
Back to top |
|
|
|