Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
nsracing - [email protected] - w. nick sison
Page: 1, 2, 3, 4, 5, 6, 7, 8  Next
Forum Index -> Buyer and Seller Feedback Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Viewing feedback for: nsracing
Email: [email protected]
Last Visited: March 25, 2024
View user's profile   View user's ads
Author Message
walter kandetzki
Samba Member


Joined: June 02, 2003
Posts: 918
Location: Dillwyn, VA
walter kandetzki is offline 

PostPosted: Wed Oct 05, 2005 2:19 am    Post subject: nsracing - [email protected] - w. nick sison Reply with quote

had W. Nick Sison - NSRACING do some machine work soo i can build a 1776 for my 1973 beetle and he does a very clean and great job on his machine work.great guy to deal with and all around great friend and ive learned alot about motors that i have never known before.everytime i have machine work done i will go to him!!!
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
spyvsspy
Samba Member


Joined: August 22, 2006
Posts: 1022
Location: inside the barrel...
spyvsspy is offline 

PostPosted: Wed Jun 02, 2010 5:07 pm    Post subject: Reply with quote

On March 16th 2010, I sent a complete and brand new pair of DRD L3 heads ($600) to Nick Sison of nsracing along with a postal money order of $350, shipping was $58. He agreed to flycut the .060 step in the chambers and cut 6 cc's from the combustion chambers to leave them at 51 cc's. After two months he asked for a postal money order to pay the shipping to me. I sent him $60 for the shipping which is more than enough to ship the heads back. Almost 3 months later and still nothing except for excuses. He says that he cannot ship them due to his job where he works in a hospital. I can understand abnormal working hours because I work nights in a hotel but that is not an excuse from not shipping a set of heads after 3 months. The way I see it he advertised his services and I paid then he has an obligation to me. 3 months is an unreasonable turn around time and in 3 months he could have had someone drop them off at the post office or had the postal service pick it up using their free online pick up service. I am totally unhappy with his excuses and so far am out of $1070 dollars (heads and money spent). At this point I am not sure if he has used them for someone else's build, or is just plain lazy. I don't know what to think anymore since this is the only problem I have had dealing on the samba. To anyone who reads this be aware that Nick just plain doesn't feel any obligations to his customers. I waited for so long because he had other people's work ahead of mine but enough is enough.
_________________
It is what it is.


Last edited by spyvsspy on Thu Jun 03, 2010 9:16 pm; edited 1 time in total
Back to top
View user's profile Send private message Gallery Classifieds Feedback
blankmange
Type 3 Darksider


Joined: July 17, 2004
Posts: 11498
Location: Bloßer Stahl-preapocalyptic MidCoast
blankmange is offline 

PostPosted: Thu Jun 03, 2010 2:41 am    Post subject: Reply with quote

spyvsspy wrote:
On March 16th 2010, I sent a complete and brand new pair of DRD L3 heads ($600) to Nick Sison of nsracing along with a postal money order of $350, shipping was $58. He agreed to flycut the .060 step in the chambers and cut 6 cc's from the combustion chambers to leave them at 51 cc's. After two months he asked for a postal money order to pay the shipping to me. I sent him $60 for the shipping which is more than enough to ship the heads back. Almost 3 months later and still nothing except for excuses. He says that he cannot ship them due to his job where he works in a hospital. I can understand abnormal working hours because I work nights in a hotel but that is not an excuse from not shipping a set of heads after 3 months. The way I see it he advertised his services and I paid then he has an obligation to me. 3 months is an unreasonable turn around time and in 3 months he could have had someone drop them off at the post office or had the postal service pick it up using their free online pick up service. I am totally unhappy with his excuses and so far am out of $1070 dollars (heads and money spent). At this point I am not sure if he has stolen my heads and money, used them for someone else's build, or is just plain lazy. I don't know what to think anymore since this is the only problem I have had dealing on the samba. To anyone who reads this be aware that Nick has either resorted to looting or just plain doesn't feel any obligations to his customers. I waited for so long because he had other people's work ahead of mine but enough is enough. I am 3 days short of informing the authorities if he does not come through.


I would start screaming sooner rather than later -- contact your Postmaster and attorney general, and then everybody else you can think of...
_________________
póg mo thóin

Certified DHS Technician

Samba Member # 24517
Back to top
View user's profile Send private message Visit poster's website Gallery Classifieds Feedback
vwinnovator
Samba Member


Joined: July 11, 2005
Posts: 1555
Location: Still doing it in the back of your VW
vwinnovator is offline 

PostPosted: Thu Jun 03, 2010 5:54 am    Post subject: Reply with quote

I just met the guy (nick) in person at the last bug-out. He just told me how he works a couple days on and a couple days off and could take care of all my shops machining needs in quick turn around time, about a week,(because my customer demand it, and I expect it to get my work done).

I can't take chances on whether or not the machine work gets done timely enough, or worst yet, if I even recieve my customers parts back, so Nick, I don't think I'll be doing business with you based on this DRD head story.

Your not using them on that williams? engine you were talking about are you?

Do the right thing, and give the guy back his heads and money. NO EXCUSES! If you can't drop them at the post office, have someone do it for you. There's 24 hrs. a day you can meet up with someone to do so. They can even meet you at the "hospital" if need be.

BTW, I'm pretty sure hospitals have mail pickup there also.
Just get online, fill out the label, and get it done.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
hazetguy
Samba Member


Joined: April 06, 2001
Posts: 10773
Location: iT StiNgeD iTseLf tO dEAd
hazetguy is offline 

PostPosted: Thu Jun 03, 2010 8:55 am    Post subject: Reply with quote

there sure are a lot of Nurse Nick feedback threads.
http://www.thesamba.com/vw/forum/viewtopic.php?t=108105
http://www.thesamba.com/vw/forum/viewtopic.php?t=157909
http://www.thesamba.com/vw/forum/viewtopic.php?t=106949
http://www.thesamba.com/vw/forum/viewtopic.php?t=90575
http://www.thesamba.com/vw/forum/viewtopic.php?t=89953

this one turns into a nurse nick self promoting argument
http://www.thesamba.com/vw/forum/viewtopic.php?t=168579

http://www.thesamba.com/vw/forum/search.php?search_keywords=nsracing&search_forum=14
_________________
thebucket: I invested in hoodride, now DBD won't return my call?
hazetguy: invested?
thebucket: Yeah Haze, its where people put money into a company in hopes of a return on their money
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Bart Dunn
Samba Consiglieri


Joined: May 09, 2004
Posts: 2354
Location: Sea level (Mid Atlantic)
Bart Dunn is offline 

PostPosted: Thu Jun 03, 2010 10:53 am    Post subject: Reply with quote

I had Nick balance some parts for me. I was pleased with his knowledge and advice about the process, and he was a little slow with it but not bad. I think it's correct to say that this is a "hobby business" for Nick and not his full-time gig, and I can't expect him to turn it around like it was. I certainly wasn't charged a "hurry up" price. There are quite a few people like that on here doing good work for other hobbyists and making some extra cash for their own projects or whatnot.

I can't imagine Nick is trying to rip anyone off, but if he's not communicating about where your parts are, that's bad form, I'd have to agree. But given my own experience I can't say that he's ripping anyone off. He's a straight-up guy.
_________________
Not enough car seats fit into my:
'58 Beetle convertible
'58 Beetle sedan
Back to top
View user's profile Send private message Gallery Classifieds Feedback
spyvsspy
Samba Member


Joined: August 22, 2006
Posts: 1022
Location: inside the barrel...
spyvsspy is offline 

PostPosted: Thu Jun 03, 2010 11:08 am    Post subject: Reply with quote

I would've never imagine him ripping me off. At first he would answer all of my pm's but I started getting a bad feeling when I couldn't find much feedback on him coupled with the fact he kept trying to sell me other things when he hadn't finished and sent my heads. Supposedly they have been finished and he plain won't send them. Now after I made this public Nick in no way has answered me back to make this situation right. And if he thinks I am going to forget about it he is wrong. I have contacted his police department and will contact his local courthouse to resolve this situation. Also since my father bought me the heads as a gift he is going through his people to resolve this situation. My father works with the department of defense and has many friends with the FBI and other agencies that will lend me a hand with this ordeal. I hope Nick follows through because if he won't then I will.
_________________
It is what it is.


Last edited by spyvsspy on Thu Jun 03, 2010 9:28 pm; edited 1 time in total
Back to top
View user's profile Send private message Gallery Classifieds Feedback
nsracing
Samba Member


Joined: November 16, 2003
Posts: 9437
Location: NOVA
nsracing is offline 

PostPosted: Thu Jun 03, 2010 4:27 pm    Post subject: Reply with quote

I was not able to check my mail. I am dealing w/ a death in my family right now.

I did not realize that you have been calling me a thief, Pete.

I am many things but not a thief. YOu will get your heads. A 350.00 job...and you call me that? What gives?

I am so sorry I was not on my PC all day looking for your email. I did not jump back on the emails soon enough for you and I get called a thief.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
Tram
Samba Socialist


Joined: May 02, 2003
Posts: 22697
Location: Still Feelin' the Bern- Once you've felt it you can't un- feel it.
Tram is offline 

PostPosted: Fri Jun 04, 2010 12:29 am    Post subject: Reply with quote

nsracing wrote:
I was not able to check my mail. I am dealing w/ a death in my family right now.

I did not realize that you have been calling me a thief, Pete.

I am many things but not a thief. YOu will get your heads. A 350.00 job...and you call me that? What gives?

I am so sorry I was not on my PC all day looking for your email. I did not jump back on the emails soon enough for you and I get called a thief.


Sorry about the death in the family.

But this kind of stuff really irks me. When I wound up in the hospital for back surgery in February, the first thing I had my wife do was get on the computer and Email my customers to update them on my condition.

That's all it takes- Communication. Rolling Eyes

Might sound heartless, but customers can't read your mind or remotely view your situation. All they know is one day everything's ok, a week or two later and you've got their cash and have gone incognito.

On top of it, you come on here all sarcastic telling the customer that their money is of no concern next to your family issues just looks bad. Not that family shouldn't come first... but why not just lose the attitude and explain the situation? Rolling Eyes

You see the same scenario on here over, and over, and over again. Not just you, either. Why not just talk to your customers?

If you can't look at the customer's point of view and empathize, you shouldn't be in business. Sorry, but them's the facts.
_________________
Немає виправдання для війни! Я з Україною.

Bryan67 wrote:
Just my hands. And a little lube. No tools.


To best contact me, please use the EMAIL function in my profile
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
nsracing
Samba Member


Joined: November 16, 2003
Posts: 9437
Location: NOVA
nsracing is offline 

PostPosted: Fri Jun 04, 2010 1:44 am    Post subject: Reply with quote

I get that, Tram. My feeling is if the person was just down a state or two, I would drive up and shove the heads into his face. As I have said before, I am many things, but NOT thief. And I resent that very much.

To not able to get to the emails and get called a thief, would you feel okay w/ that?

Anything can happen to any person. But to assume you got took and no evidence of anything of sort is just a lousy way to deal w/ stuff. I have handled way more money than that. To get accussed of thievery for a lousy 350.00 just irritates me so much.

I have been on this site for a long time. I am not about to just dissappear... is all.
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
blankmange
Type 3 Darksider


Joined: July 17, 2004
Posts: 11498
Location: Bloßer Stahl-preapocalyptic MidCoast
blankmange is offline 

PostPosted: Fri Jun 04, 2010 3:10 am    Post subject: Reply with quote

nsracing wrote:
I get that, Tram. My feeling is if the person was just down a state or two, I would drive up and shove the heads into his face. As I have said before, I am many things, but NOT thief. And I resent that very much.

To not able to get to the emails and get called a thief, would you feel okay w/ that?

Anything can happen to any person. But to assume you got took and no evidence of anything of sort is just a lousy way to deal w/ stuff. I have handled way more money than that. To get accussed of thievery for a lousy 350.00 just irritates me so much.

I have been on this site for a long time. I am not about to just dissappear... is all.


Without communicating to him about why it was taking so long to finish/ship his heads, jumping to the worst-case scenario may have been the next logical step. He sends you money + heads to be worked and then you essentially disappear, with no emails, etc, to let him know what's going on - what is he supposed to think?

And you have yet to respond to him about his heads -- where are they and when will he get them back? You've had them for almost three months and have the money to ship them back....
_________________
póg mo thóin

Certified DHS Technician

Samba Member # 24517
Back to top
View user's profile Send private message Visit poster's website Gallery Classifieds Feedback
Tram
Samba Socialist


Joined: May 02, 2003
Posts: 22697
Location: Still Feelin' the Bern- Once you've felt it you can't un- feel it.
Tram is offline 

PostPosted: Fri Jun 04, 2010 10:54 am    Post subject: Reply with quote

nsracing wrote:
I get that, Tram. My feeling is if the person was just down a state or two, I would drive down and shove the heads into his face.


No, you obviously, by that statement, don't get it. And you have anger issues to boot. If you had communicated, nobody would be "calling" you anything.

So getting heads "shoved in his face" is his thanks for doing business with you? Nice.

Oh, and please point out where anyone called you a "thief".
_________________
Немає виправдання для війни! Я з Україною.

Bryan67 wrote:
Just my hands. And a little lube. No tools.


To best contact me, please use the EMAIL function in my profile
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
hazetguy
Samba Member


Joined: April 06, 2001
Posts: 10773
Location: iT StiNgeD iTseLf tO dEAd
hazetguy is offline 

PostPosted: Fri Jun 04, 2010 12:14 pm    Post subject: Reply with quote

spyvsspy wrote:
On March 16th 2010, I sent a complete and brand new pair of DRD L3 heads ($600) to Nick Sison of nsracing along with a postal money order of $350, shipping was $58. He agreed to flycut the .060 step in the chambers and cut 6 cc's from the combustion chambers to leave them at 51 cc's. After two months he asked for a postal money order to pay the shipping to me. I sent him $60 for the shipping which is more than enough to ship the heads back. Almost 3 months later and still nothing except for excuses.


DISCLAIMER: please, please don't take this as any kind of defense for nurse nick, because i will never, ever do that, but:

if you shipped them to him on 3/16/10, and figure a week for them to get to him takes it to 3/23/10.
you say 2 months after that, is when he said he asked for return shipping payment makes it 5/23/10.
i'm guessing it could take up to a week for him to receive payment if you sent another money order, so that takes it to 5/30/10. it's only 6/4/10, which is the beginning of this week. not 3 months. 3+ months total? yeah, but not 3 months with the stuff not being shipped.

while i would presume that when he asked for payment the heads were machined and ready to go, i would not presume they were packed and ready for shipment at the same time, although a smart person would pack the parts so they could be shipped when payment did arrive.
IF what he says about his "family emergency" is true, then maybe i can see cutting a little slack for not shipping this week* (based on timeline above). even when i had several family emergencies recently, i was still able to get parts shipped within a couple days of receiving payment, so i am not really giving much credence to that excuse. and yes, there are numerous methods of having the package shipped without being personally present. many shipping places have rather long hours too. i really can't think of a work shift that would not allow someone to get to a shipping place either before or after work. sometimes it takes me a week or longer to pack and ship things, that's just the way it goes. it is rare, but every once in a while it happens. HOWEVER, i will always let the person know i am running behind and will tell them when the stuff gets shipped.

have you picked up the phone and called him about this? his phone number is in all of his ads.

was his turn around time slow? yeah, that seems to be a pretty common thing with nurse nick.

i'm not going to get into my personal contentions with nick and his self righteous pomposity. trying to discuss things in a civil manner with nick is like trying to have a discussion with an enraged mental patient who has been off their meds for a few weeks. there will always be an excuse, his way will always be the only right way, his machining is the absolute best in the entire world (well then why are you not a professional machinist rather than a "therapist"???), and everyone else is in the wrong. i feel this is clearly evident by his attitude about shoving the heads in your face, among countless other abuses he throws around in the forums.

unfortunately, he still has your heads, and will probably turn this in to a big game where he fucks with you about it instead of just taking the 10 minutes and going to fedex to ship the package.

on a side note, i'm sure the neighbors love the parts washers in the driveway, or are they in the front yard. Rolling Eyes
Image may have been reduced in size. Click image to view fullscreen.

_________________
thebucket: I invested in hoodride, now DBD won't return my call?
hazetguy: invested?
thebucket: Yeah Haze, its where people put money into a company in hopes of a return on their money
Back to top
View user's profile Send private message Gallery Classifieds Feedback
vwinnovator
Samba Member


Joined: July 11, 2005
Posts: 1555
Location: Still doing it in the back of your VW
vwinnovator is offline 

PostPosted: Fri Jun 04, 2010 3:03 pm    Post subject: Reply with quote

Looks like he's working out of his house.

Now I get it Idea , he's got to be violating zoning regs and epa stuff on several levels.

No wonder he's so "selective" on who he will do work for.

From all I've read on the forums, as well as my personal conversations with him, I've come to my conclusion that nick is simply a machine collector.

Even though we've spoken several times about doing some work, He simply will not give me any pricing for basic jobs such as alignboring and cutting valve seats.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
blankmange
Type 3 Darksider


Joined: July 17, 2004
Posts: 11498
Location: Bloßer Stahl-preapocalyptic MidCoast
blankmange is offline 

PostPosted: Fri Jun 04, 2010 3:10 pm    Post subject: Reply with quote

vwinnovator wrote:
Looks like he's working out of his house.

Now I get it Idea , he's got to be violating zoning regs and epa stuff on several levels.

No wonder he's so "selective" on who he will do work for.

From all I've read on the forums, as well as my personal conversations with him, I've come to my conclusion that nick is simply a machine collector.

Even though we've spoken several times about doing some work, He simply will not give me any pricing for basic jobs such as alignboring and cutting valve seats.


this may be a clue as to why:

EdW wrote:
Just be wary of his pricing from what I've understood. Reliable sources from this site have told me that his prices change even while he's working on your parts. This was pretty much confirmed in an exchange on chat today:

Quote:
nsracing: I only offer prices on the day. I do not hold it for the next day.

nsracing: If you do not commit...then no deal right. If you call next morning..prices have changed.

EdW: So, your prices change daily, man what a honest upstanding businessman

blankmange: so if I called nsr today and requested a quote and said 'lemme check with a couple of other guys'

blankmange: and then called you back tomorrow, the price would be different?

EdW: That's what he's saying Dave

nsracing: yes sir.

blankmange: that would lose my business on the spot

blankmange: whether you think it is wishy-washy or not, that is a poor way to do business

_________________
póg mo thóin

Certified DHS Technician

Samba Member # 24517
Back to top
View user's profile Send private message Visit poster's website Gallery Classifieds Feedback
Lee.
Samba Animal Controller


Joined: December 22, 2003
Posts: 3079
Location: Denver, CO
Lee. is offline 

PostPosted: Fri Jun 04, 2010 4:50 pm    Post subject: Reply with quote

spyvsspy wrote:
He says that he cannot ship them due to his job where he works in a hospital. I can understand abnormal working hours because I work nights in a hotel but that is not an excuse from not shipping a set of heads after 3 months.



That is one of the lamest excuses I've ever heard of.


Nick, just give the guy his heads back and go away.
_________________
www.DenverWildlifeControl.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website Gallery Classifieds Feedback
spyvsspy
Samba Member


Joined: August 22, 2006
Posts: 1022
Location: inside the barrel...
spyvsspy is offline 

PostPosted: Fri Jun 04, 2010 5:40 pm    Post subject: Reply with quote

Nick communicated to me that he would ship the heads tomorrow and send me a confirmation #. One step forward...I will update on that and when they arrive.
I don't question Nick's ability to machine parts and the reason I chose him to do the machining on my heads was his knowledge and the quality of the machines that he owns.
Quote:
if you shipped them to him on 3/16/10, and figure a week for them to get to him takes it to 3/23/10.
you say 2 months after that, is when he said he asked for return shipping payment makes it 5/23/10.
i'm guessing it could take up to a week for him to receive payment if you sent another money order, so that takes it to 5/30/10. it's only 6/4/10, which is the beginning of this week. not 3 months. 3+ months total? yeah, but not 3 months with the stuff not being shipped.

Everything that I have shipped from Puerto Rico has arrived in 3 days since I ship using 2-3 day shipping on all parts that I have sold or have sent to be worked on. Initial payment sent with the heads and shipping payment sent on Nick's request. Why would he not ship them if he's asking for the shipping money? That's what sent me over the edge.
_________________
It is what it is.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Gary
Person of Interest


Joined: November 01, 2002
Posts: 17069
Location: 127.0.0.1
Gary is offline 

PostPosted: Fri Jun 04, 2010 5:55 pm    Post subject: Reply with quote

^^ This thread has been an interesting read. Based on what I could gather, he's making you bend over and grab your ankles on the shipping. $60 for a set of heads is outrageous.
_________________
West Virginia State Board of Education v. Barnette, 319 U.S. 624 (1943)
Back to top
View user's profile Send private message Gallery Classifieds Feedback
spyvsspy
Samba Member


Joined: August 22, 2006
Posts: 1022
Location: inside the barrel...
spyvsspy is offline 

PostPosted: Sat Jun 05, 2010 12:40 am    Post subject: Reply with quote

Quote:
I understand your place. I am really sorry for the delay in mailing. But to call me a thief?? Damn dude. Then what are you going to do when you get your heads? You gonna say I was not??

I never once ripped any off. I have been on Samba forever. I do not intend to start ripping people off.

*I will mail these package tomorrow when I get home from work. I will give you confirmation.


^^Private message posted Thu June 3rd 7:08 PM by nsracing^^

Friday passed without one word from Nick. I will let everyone know how Saturday goes. Also, I hope that my heads weren't used on another build cause I will know in a heart beat. My carburator manifolds are match ported to them.
_________________
It is what it is.
Back to top
View user's profile Send private message Gallery Classifieds Feedback
blankmange
Type 3 Darksider


Joined: July 17, 2004
Posts: 11498
Location: Bloßer Stahl-preapocalyptic MidCoast
blankmange is offline 

PostPosted: Sat Jun 05, 2010 2:40 am    Post subject: Reply with quote

Gary wrote:
^^ This thread has been an interesting read. Based on what I could gather, he's making you bend over and grab your ankles on the shipping. $60 for a set of heads is outrageous.


agreed -- if I remember correctly, another Samba member here ships them in USPS flat rate boxes for $15 (or so)...
_________________
póg mo thóin

Certified DHS Technician

Samba Member # 24517
Back to top
View user's profile Send private message Visit poster's website Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Buyer and Seller Feedback All times are Mountain Standard Time/Pacific Daylight Savings Time
Page: 1, 2, 3, 4, 5, 6, 7, 8  Next
Page 1 of 8

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2023, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.