setting crank end play

beatrich · Posted: Sat Jun 05, 2010 4:42 pm Post subject: setting crank end play

Do the rods need to be installed to set engine end play?

beatrich · Posted: Sat Jun 05, 2010 4:43 pm Post subject:

This is for a stock 2.1. I've got new rod bearings in, but still working on pistons and heads. I'll be changing out the pulley to a triple, and am wondering the order of operations here.

tencentlife · Posted: Sat Jun 05, 2010 8:46 pm Post subject:

No, doesn't matter if the rods are on or off. Same for the pulley, doesn't matter. You can set the endplay with the naked crank or the engine fully built.
_________________
Shop for unique Vanagon accessories at the Vanistan shop:
https://intrepidoverland.com/vanistan/

Please don't PM here, I will not reply.

Experience is kryptonite to doctrine.

beatrich · Posted: Sun Jun 06, 2010 5:13 pm Post subject:

Thanks for the help!


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Vanagon	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1