Author |
Message |
oval56 Samba Member
Joined: July 21, 2003 Posts: 1309 Location: oktoberfest maintown
|
Posted: Thu Jan 13, 2011 5:38 am Post subject: Denzel full flow filtercan - insert? |
|
|
so the time is close and i can install my denzel pump cover and filterhousing on my new engine (74x82,5)... but i have a problem, does anyone know where to get the right oilfilterinsert for that housing?
thanks
_________________ www.oval56.com
1956 Oval, 2364ccm typ4
1957 Oval Ragtop 1584ccm singel port modified
1950 Hebmüller, 1584ccm okrasa modified
DBK Germany!!!!!!!!!!
www.dbkvw.com |
|
Back to top |
|
|
John Moxon Samba Moderator
Joined: March 07, 2004 Posts: 13952 Location: Southampton U.K.
|
|
Back to top |
|
|
oval56 Samba Member
Joined: July 21, 2003 Posts: 1309 Location: oktoberfest maintown
|
Posted: Thu Jan 13, 2011 6:27 am Post subject: |
|
|
John Moxon wrote: |
Is that larger than the F3P Andi? |
no john, but the diameter of the inner tube is bigger, i can measure it today / tonight.
the inner tube as a owhn oilpresure valve with spring installed and is bigger the housingdimension should be the same...will check it _________________ www.oval56.com
1956 Oval, 2364ccm typ4
1957 Oval Ragtop 1584ccm singel port modified
1950 Hebmüller, 1584ccm okrasa modified
DBK Germany!!!!!!!!!!
www.dbkvw.com |
|
Back to top |
|
|
gimmesomeshelter Samba Member
Joined: May 08, 2004 Posts: 1466 Location: San Carlos, CA
|
Posted: Thu Jan 13, 2011 8:03 am Post subject: |
|
|
Hello-
My full flow canister filter is model FH6-PL, and uses a CH-6PL filter.
Paul _________________ "I would rather have questions that can't be answered than answers that can't be questioned."
Richard Feynman |
|
Back to top |
|
|
Mr. Okrasa Original Old Speed
Joined: May 20, 2000 Posts: 726 Location: Eastside, Costa Mesa. So. Califas...Loco's ;-)
|
Posted: Thu Jan 13, 2011 10:36 am Post subject: Oil Filter Size |
|
|
Many people have the misconception that any filter can be used as a "full flow". The typical "by pass" oil filter that is used on the Okrasa engine is not the same as the one used for the "full flow" Denzel. If you notice this Denzel oil filter has a LARGER inlet and outlet openings necessary for maintaining proper flow/pressure while filtering 100% of the oil. Cheers!
Notice this black and white photo of an original Denzel engine with the same filter. Note the diameter of the oil lines to and from filter.
Here is another photo of a Denzel engine I purchased that has the same diameter filter and lines below:
_________________
See my Instagram: https://www.instagram.com/okrasa/
1959 VW Karmann Ghia Coupe / Bamboo-Green / Denzel 1300cc / OG. owner, paint
Denzel engine running. See this link: https://youtu.be/DgUlsQDTXTE
VW www.Okrasa.com
356 www.PreA356.com |
|
Back to top |
|
|
John Moxon Samba Moderator
Joined: March 07, 2004 Posts: 13952 Location: Southampton U.K.
|
|
Back to top |
|
|
Mr. Okrasa Original Old Speed
Joined: May 20, 2000 Posts: 726 Location: Eastside, Costa Mesa. So. Califas...Loco's ;-)
|
Posted: Thu Jan 13, 2011 11:30 am Post subject: |
|
|
John Moxon wrote: |
So what's the designated Fram model # on that one Joe? |
Here are some more photos that show the major differnces between the two filters. I purchased several of these
NOS Denzel full flow oil filters years ago when nobody wanted them because they were too big???? Cheers!
_________________
See my Instagram: https://www.instagram.com/okrasa/
1959 VW Karmann Ghia Coupe / Bamboo-Green / Denzel 1300cc / OG. owner, paint
Denzel engine running. See this link: https://youtu.be/DgUlsQDTXTE
VW www.Okrasa.com
356 www.PreA356.com |
|
Back to top |
|
|
John Moxon Samba Moderator
Joined: March 07, 2004 Posts: 13952 Location: Southampton U.K.
|
|
Back to top |
|
|
oval56 Samba Member
Joined: July 21, 2003 Posts: 1309 Location: oktoberfest maintown
|
Posted: Thu Jan 13, 2011 1:56 pm Post subject: |
|
|
as ia said full flow:
which filterinlet can i use?? _________________ www.oval56.com
1956 Oval, 2364ccm typ4
1957 Oval Ragtop 1584ccm singel port modified
1950 Hebmüller, 1584ccm okrasa modified
DBK Germany!!!!!!!!!!
www.dbkvw.com |
|
Back to top |
|
|
Danpa Samba Member
Joined: August 21, 2007 Posts: 1248 Location: Valparaiso, in
|
Posted: Thu Jan 13, 2011 7:14 pm Post subject: denzel full flow filtercan - insert? |
|
|
This is the Wix filter I'm using for my old Purolator NE-1517;
Part Number: 51076
UPC Number: 765809510760
Principal Application: Dodge Trucks (65-75), Chrysler Industrial Engines
All Applications
Style: Cartridge Lube Metal Canister Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.198
Outer Diameter: 3.367
Inner Diameter: 0.764
Nominal Micron Rating: 25
Just about done changing it over from a bypass to a full flow. |
|
Back to top |
|
|
oldbusboy Samba Member
Joined: June 25, 2006 Posts: 604 Location: Bowen Island, BC Canada
|
Posted: Mon Dec 23, 2013 12:31 pm Post subject: |
|
|
If I wanted to track down the larger diameter oil lines for this larger filter who has them? I'd need both the oil line and banjo fittings.
Trevor _________________ 1968 porsche |
|
Back to top |
|
|
Danpa Samba Member
Joined: August 21, 2007 Posts: 1248 Location: Valparaiso, in
|
Posted: Mon Dec 23, 2013 8:07 pm Post subject: |
|
|
ThreeSpeed wrote: |
If I wanted to track down the larger diameter oil lines for this larger filter who has them? I'd need both the oil line and banjo fittings.
Trevor |
Don't know if this helps or not.
http://www.newcoproducts.com/flexi-hoses/german-hoses.htm |
|
Back to top |
|
|
John Moxon Samba Moderator
Joined: March 07, 2004 Posts: 13952 Location: Southampton U.K.
|
|
Back to top |
|
|
thomas. Samba Member
Joined: July 31, 2010 Posts: 1291 Location: South West (Pa.)
|
|
Back to top |
|
|
vwmadeinireland Samba Member
Joined: October 31, 2003 Posts: 44 Location: Cork, Ireland
|
Posted: Thu Sep 13, 2018 7:09 am Post subject: Re: Denzel full flow filtercan - insert? |
|
|
No that kit is a BYPASS kit, not a FULL-FLOW canister/filter.
I have 7 NOS Denzel filters left in case anyone is interested:
|
|
Back to top |
|
|
yesitsme Samba Member
Joined: July 18, 2011 Posts: 3 Location: Germany
|
Posted: Sat Jul 25, 2020 6:52 am Post subject: Re: Denzel full flow filtercan - insert? |
|
|
Hi,
Im interested in buying one of your full-flow filters, if you still have one. Im in Germany.
Regards
Norfried |
|
Back to top |
|
|
Big_E_Deluxe Samba Member
Joined: September 23, 2013 Posts: 264 Location: Charlotte, NC
|
|
Back to top |
|
|
|