1967 Reduction box torque spec

1105 · Posted: Fri Apr 19, 2013 6:39 am Post subject: 1967 Reduction box torque spec

Rebuliding 1967 reduction boxes. Does anyone know the torque spec for the the nut on the stub axel that holds the stub axel in the reduction box. Not the axel nut. Also the torque spec for the 8mm bolts that hole the reduction box case halves together.
Thanks for your help.
1105

hazetguy · Posted: Fri Apr 19, 2013 8:48 am Post subject:

41mm headed nut on driven axle: 150Nm (110 ft. lbs).

reduction box case cover bolts: i usually torque these to 25Nm (18 ft. lb).

1105 · Posted: Sun Apr 21, 2013 7:42 am Post subject:

Dear Hazetguy,
Thank you for the reply.
Yours,
1105


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Split Bus	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1